. We have a kitchen. We invested some money to have Ikea install the main part of the kitchen, partly so we can be assured. The water & electrical appliances are safe to use., Now it’s time for us to complete our dream kitchen.
. Why …? Why is it so difficult to open Ikea packages Haha? We ordered the island with the rest of our kitchen to save delivery, cost and opted to build it ourselves to save on installation fees as well.
Just 1.5 years ago. I had no idea how to assemble Ikea furniture, and now everything goes so quickly and smoothly For the island. We combined two 60x60cm and two 60x37cm units. I’ve always wanted an island, but never had the opportunity to have one.
. With this open kitchen. We finally have the space Clamp to screw the cabinets together. Tightly. We added the feet that came with the cabinets.. These will be covered by a toe-kick plate later on., Installing matching oak-veneer sides for a smoother look.
For the kitchen makeover we’re intentionally taking our time. So we can use the space and see what our needs are.. In the meantime, we got some new appliances~. I also organized the kitchen and the storage space we have is just right.
) After using the kitchen for a few weeks, I realized I have no need for upper cabinets. Since I’m short, they’re inconvenient for me anyway.. Instead, I want to add two shelves between the sink and the stove.
. We loved the floating shelf that we installed in our old kitchen, so we want to have some open shelving in this kitchen as well.. The lower shelf will be used for storing dried goods and the upper shelf for displaying some decor to add character to the space.
. I first made tiny pilot holes on the shelves so that I can screw them into the brackets without splintering the wood.. I finally bought these bamboo-lid glass containers from Ikea. I wanted them for so long, but waited till.
We moved. The power cord hanging out of the hood has been bothering me so I’m going to organize it with a cable channel.. I really didn’t feel like working on the kitchen today, so I tricked myself into doing this small task.
Once I accomplish. This I’ll feel good enough to tackle another bigger task. It got the momentum going, … ), Unlike before our new rental doesn’t, have a pre-installed backsplash.. We went back and forth about whether or not to tile ourselves, but after using this space as-is for the past 2 months, I actually really enjoy the white wall look.
. So instead we found a paint that is durable.. Any kitchen. Splashes can also be easily wiped off.. I will let you know how it holds. Up~ Our new place is surrounded by blue skies and green fields.. I wanted to frame a little piece of that in our kitchen.
. I got a simple Ikea frame.. The black is too modern compared to the rest of the kitchen, so I’m going to diy it into a vintagey brass frame. Give a rough sand, so paint adheres better, but don’t forget to clean up the dust after~ I’m painting with a foam brush instead of spray Painting to get a more imperfect and vintage look.
That way it feels more laid-back like the rest of the kitchen.. I ordered some custom turned legs for a special project. I’m, going to build a little console table for our coffee nook. I digitally sketched out the table to know what sizes of wood I need.
Cut.. This project is a present for Pat. I’m the cook in the home, so the kitchen design is mostly catered to. Me. Pat usually makes the coffee, so I really wanted to make a special “coffee bar” console table for him.
, I’m nervous, because I’ve never actually made a whole piece of furniture. It’s, also my first time making pocket holes and I found it so interesting~~. I get many comments asking what’s my secret to learning to diy.
The truth is there is no secret.. I learned everything through Youtube videos. January 2021. I didn’t even know how to use an electric screwdriver, but now I’m slowly, making my way up to using “scary” tools.
It’s, all about research practice failing and even more practice. ). I decided on the tabletop length after building the body. Sand with 180 to 220-grit sandpaper to prep for staining.. I also want to build a drawer to store coffee and tea bags.
To build a basic drawer, simply build a box Since there isn’t going to be anything too heavy stored inside the base is simply added on one side using wood glue and some nails. To give Pat all the “luxury” I added a pair of drawer slides with soft close.
. The tabletop is fitted onto the legs with 4 dowels and tightly secured with 4 small L brackets underneath. Gluing on the drawer front. My camera’s dying. Pat buh, bye camera. I first used a teak stain on the entire table, sanded it lightly with 180-grit sandpaper and went on top with a darker walnut stain to add warmth.
. I searched high and low for the perfect knob and finally found this vintage knob with a pretty backplate. What’s, a coffee bar without a rod to hang your favourite mugs. It took 3 months, but I found the perfect light for the kitchen.
It uses five small energy-saving G9 led bulbs. yay. I want to add a hanging rod next to the sink for more storage., I’m spraypainting, it brass to bring more warmth into the kitchen. It has taken over 3 months, but I’m really happy.
We were able to design the kitchen totally to our own needs and preferences.. The kitchen has become, without a doubt, the heart of our home.. With this new apartment, I promised myself to take my time in order to reach an end goal.
I truly wanted., Although it took months, it has been really worth it. Thank you so much for coming on this journey with me, )
If you want to renovate your home, then you’ll need to find a suitable loan to get the job done. However, there are certain guidelines and requirements you need to follow before you can get a mortgage to carry out the project.
What Is a Renovate Home Loan?
A renovate home loan is a way for homeowners to tap into their home equity and get the funding they need for remodeling. It also allows them to keep their house energy efficient, add windows and siding, and repair damaged walls. However, the process of applying for one can be complicated.
Unlike conventional mortgages, a renovation loan is based on the value of the home after renovations have been completed. This is important because lenders set their rates based on the ratio of the loan to the appraised value of the home. The more the house’s value has increased, the more the lender is willing to lend.
Before you apply for a home renovation loan, make sure you have a realistic idea of the amount you will need to borrow. Some of these loans are limited to a certain amount and have a short repayment period.
Whether you’re planning a new kitchen or simply need some roof repairs, it’s important to understand how to get a home loan to renovate your property. Renovation loans can save you money in the long run and make your home more energy efficient.
The best type of renovation loan depends on your budget and property. Before applying for a home renovation loan, check your credit score to see what type of borrowing option is best for you.
One of the most popular options is a home equity line of credit, also known as HELOC. This loan is more affordable than a personal loan but has variable rates.
Another option is the Freddie Mac CHOICERenovation loan. This loan allows borrowers to finance the purchase and renovation of their home, making it more convenient than a traditional mortgage.
If you are looking to improve the look and function of your home, it’s worth considering a home renovation loan. These loans allow you to finance a variety of repairs, from new siding to a new roof. You can also use these funds to make your home energy-efficient.
Renovation loan programs vary from lender to lender. Some require a minimum credit score. They can also charge a premium.
Another loan option is a construction loan. This type of loan replaces your current mortgage and is often used for major repairs. It can be a complicated process and carries a high interest rate.
A personal loan, or a credit card, can also be a good way to finance your home improvements. Credit cards tend to have higher interest rates than home improvement loans, though.
For the best deal, it’s important to find a mortgage broker. Not only will they help you find a lender, but they can guide you through the process.
Renovate Home Loan Financing
Renovation home loan financing is a great way to help you improve your home. However, you should be aware that there are more risks involved in renovation mortgages than you may realize. The good news is that if you choose a renovation loan, you will be able to make your house more comfortable and energy efficient.
In order to qualify for a home renovation loan, you will need to have a minimum credit score. Most lenders will require a FICO score of 680-700. This allows you to get the best interest rates.
Alternatively, you can try a credit card with a no-interest promotion. While it will cost you less, it is important that you are able to pay back the balance quickly.
Another option is to apply for a home equity line of credit (HELOC). With a HELOC, you will be able to withdraw money over a specified period of time, but you will also have to pay interest.
Renovate Home Loan Guidelines
If you are looking to renovate your home, you need to find out what is available to you. A home renovation loan will help you get the job done at the right price. However, before you apply, make sure you understand the pros and cons of each option.
You can apply for a home renovation loan in a number of ways. Some offer low interest rates and flexible repayment options. For example, you can borrow money from your home’s equity or use a credit card that offers no interest for a period of time.
Renovation loans are also available from private banks. They are much more flexible than traditional loans. Many private banks allow for a higher percentage of the home’s value in your renovation loan. The biggest risk with these loans is over-improving your home.
Renovate Home Loan Requirements
If you are planning on renovating your home, you may be interested in getting a loan to cover the costs. However, before you apply, it is important to understand what kind of loan you will need. This can help you get the best deal for your renovation project.
There are several different types of renovation loans, each with its own set of requirements and benefits. Before you decide which type is right for you, it is a good idea to talk to a mortgage banker. A specialist can give you advice and make the best use of your loan.
Whether you choose a jumbo or standard 203(k) loan, you will need to be able to meet certain requirements. Your credit score, home appraised value, and the value of your home after renovations are all important factors.
Typically, you will need to have a credit score of at least 500 and a down payment of at least 3.5%. In order to qualify for the FHA 203(k) loan, you will also need to submit a construction plan. The construction plan will outline the details of your renovations. It will also list the cost breakdown.
Renovate Home Loan Debt Ratio
A renovation home loan is a great way to improve your pad with the minimum of fuss and bother. If you’re interested in tackling a remodel, there are plenty of lenders willing to work with you. Some of these loans even allow you to cash out. While they may not be for everyone, these mortgages can get you started down the path to homeownership. Regardless of what you decide to do, make sure you read up on the finer points of the industry.
Renovate Home Loan Approval Process
When considering a renovation home loan, it is important to understand the requirements. You should also consider the costs and time required to complete the project. It is also important to choose the right type of loan. There are several types of mortgages available, each with its own qualifications.
Renovation loans usually have stricter requirements than traditional mortgages. They require an appraisal and construction plans. Lenders also check your debt-to-income ratio and credit score.
Renovation loans are a great way to finance home improvements. Unlike conventional loans, they spread the cost over a period of years, and allow you to borrow against your home equity. However, they are not designed for recent buyers, and the interest rates tend to be higher.
Home equity line of credit (HELOC) loans fall between renovation mortgages and traditional loans. The lender will determine the amount you can borrow based on the value of your home after you complete renovations. HELOCs can be used to fund both large and small projects.
When your wall experiences water damage, it is vital to take action to renovate the damage. Having a professional help you dry out your wall can ensure that you aren’t left with a permanent water damage problem. If you are unsure of what to do, here are some guidelines that can be of great assistance.
What Caused Water Damage To The Wall?
First, you’ll need to determine what caused the water damage? Was it a leak? Was it a burst pipe? Was it an appliance leak? You’ll need to trace the source of the leak and repair it so that further water damage does no occur.
When looking for signs of water damage in a wall, you might be surprised by the amount of hidden or unseen problems you may face. Water can get into framing materials, insulation and even the paint on the walls. This could result in damage that can cost you a lot of money to fix.
A small hole or a small leak is the most obvious sign of water damage, but it isn’t the only way. You might be asking yourself, “How do I know if my wall has a problem?” It’s best to have a water damage expert come out to evaluate your situation and give you a clear picture of what needs to be done.
The first step in any water related repair is to find out what caused the problem in the first place. This will allow you to avoid costly and dangerous mistakes. Using the right tools is also a must. Remember, the best way to prevent further damage is to act fast.
In fact, it is quite common for homeowners to make a small water damage claim. Approximately one in every 50 homes makes a water damage claim, averaging about $7,000.
While water damage may not seem like a big deal, it can be very costly to repair. Some homeowners will opt to hire a contractor to handle the job. They will want to keep copies of receipts for any repairs that they do. Having receipts handy can help your insurer’s adjuster to quickly evaluate the extent of the damage.
Depending on your insurance policy, the most expensive repair might be a small water leak in your refrigerator. However, if your home is flooded, your insurance might pay to replace your furniture and appliances.
Homeowners insurance can also cover water damage due to vandalism. It can also cover the costs of damage caused by extreme weather. For example, if your pipes freeze in the winter, they might break and cause a lot of water damage.
Risk Of Mold From Wall Water Damage
If your walls have suffered water damage, there is a risk that mold will grow. If this occurs, it will become a health concern for you and your family.
Mold is an unpleasant fungus that grows in damp, humid conditions. It is most common in homes with moisture and lack of light. In addition, mold can be toxic, and can cause allergic reactions.
Fortunately, you can take measures to prevent mold from growing. One of these steps is to open windows and let air circulate. Another is to use a dehumidifier. These devices will help reduce the level of humidity in your home, which will discourage mold growth.
If your wall has suffered water damage, it is not a bad idea to clean the affected surfaces. Do not use ammonia-based cleaners and other detergents that contain chlorine bleach. They are unsafe when mixed together.
After the affected surfaces have dried, you can begin to remove any mold. This is not a quick process, and you may have to contact a professional to do the job for you.
How To Dry Out A Wall After Water Damage
If you have experienced water damage to a wall, you may wonder how to dry it out. There are several methods to get the job done. The key is finding the right method for your situation.
The first step in drying out a wall is to find the source of the problem. In most cases, you should contact a professional to fix the issue. They can use tools and instruments to locate the leak and perform the necessary repairs.
You should also remove anything from the wall that is wet. This includes shelving, paintings, wall coverings, insulation and other porous goods. This can speed up the drying process and keep your items from becoming damaged further.
The best way to get a wet wall dry is to allow natural ventilation. This will remove moisture from the air and reduce lingering odors.
Using a high-capacity air mover is a great way to suck moisture out of the air. High-volume fans can also help speed up the drying process.
You should also remove any wet insulation from the wall. Leaving this in place can promote mold growth.
Wall Water Damage Treatment
Water damage on the walls of your house can lead to serious structural problems. If you find this to be the case, it’s important to get the repairs done as quickly as possible. You should also be aware that untreated water damage can lead to the growth of mold in a very short period of time. Mold can pose a health risk, and can be costly to repair.
Depending on the severity of the water damage, you may need to hire a professional to complete the repairs. They will be able to protect your home from further damage and ensure the work is completed correctly.
Aside from drywall, water damage on walls can also affect other surfaces. Stains can develop, and peeling paint can occur. Both can be removed with a detergent solution or a sealer.
Wall Water Damage Removal
Water damage is a common problem that can occur in many different places, and for many different reasons. It’s important to know how to identify and deal with it in order to prevent additional damage.
Identifying the source of water damage is the first step. Contact a professional to help you assess the damage and provide an estimate for repairs.
You should also remove any loose items from the area. This is especially important in the case of drywall. Doing so will speed up the drying process.
If you don’t have a dehumidifier, you can remove the moisture from your air with a mop or wet vacuum. If your walls are still wet, it’s a good idea to open windows to let the air in.
Wall Water Damage Repair
Water damage to a wall can be devastating. Not only can it cause unseen mold and mildew growth, it can also compromise your home’s structure.
If you notice visible signs of water damage to a wall, contact a professional for repair. You don’t want to spend more time trying to fix the problem on your own, especially if it’s structurally harmful to your home.
Wall water damage can be caused by several sources, including inside sources and outside sources. The first step in fixing water damage is to find out what the source is.
In addition, you’ll want to know what signs to look for. Some common signs include cracks, discoloration, and peeling paint.
Another sign is when the drywall buckles. This may be the result of water behind the drywall. That’s why you should take a closer look at the walls.
When you have water behind the drywall, it’s possible to stretch the paint and make the surface appear spongy. Regardless of the paint type, this can occur if the drywall is left wet for a long period of time.
Wall Water Damage Solutions
Water damage is a problem that can have a serious impact on the structure of your home. If not caught in time, it can lead to mildew, mold, and structural problems that could cause major headaches for homeowners.
Fortunately, there are ways to get your home back to its former glory. For starters, you can try to dry out the area as much as possible. A fan or a dehumidifier can speed up the process.
Another thing to do is to seal the leak. The best way to do this is to call in a professional plumber. An experienced one can pinpoint the source of the leak and give you an estimate of the cost to repair it.
Identifying the source of the water is an important step in the process of getting your walls back to their former glory. Having a licensed plumber check out your pipes can also help prevent further problems from occurring.
One of the most noticeable signs of water damage is a stained wall. This can be due to a wide range of causes, from a cracked pipe to a leaking tank.
Welcome back to Fix This Build That. Today we’re installing vinyl plank flooring. I’Ve installed ceramic tile before, but this is my first time doing: laminate or vinyl flooring now I’ll be installing this in this laundry room and giving you all the beginner tips that I learned along the way I started by moving the laundry machines and everything else out Of the room and apparently elves, don’t really steal your socks, They just hide them under the dryer, But while the machines were gone, It was a great time to paint the rest of the wall that I didn’t paint because I didn’t think anybody would ever see it.
Now I know I’m not the only one so comment down below and tell me where your unpainted walls are hiding in your house. Next, I pulled off the quarter round molding to prep for install.. I would have pulled off the baseboards too, but since I have wainscoting installed, It would make a huge undertaking and in the end you won’t really be able to tell the difference anyway In the vinyl planks that I’m using are a little under 4 feet.
Long and just under 8 and 3/4 of an inch wide I’ll have a link below to this exact product, as well as all the tools that I use during the vinyl plank flooring, installation Which I tried to keep as basic as possible.
With your flooring should help you figure this out or You can nerd out like, I did and make a 3d model of the room and lay out the planks Exactly how you want them beforehand. Seriously, though, for an over analyser like me, this is the only way To go, you can map out and stagger the seams and play around with the different layouts, based on the bump outs in the room to see how it’s all going to look, if you don’t have any programs, you can do this with just find a nerdy friend And have them do it for you or you can Always just use graph paper too, And with my layout all done.
I went back to the laundry room to start the install. You always want to start on the left side of the room in a corner due to the positioning of the tongues and the grooves on this flooring. I pried up the transition piece between the current vinyl sheet floor in the carpet.
Then I cut back the carpet to make room for the new transition strip, which is a metal channel. Then there was a small gap between the plywood underlayment of the vinyl sheet and the tack strip the carpet.
So I filled in the gap to give that channel a little place to be attached. I used a sample piece of the flooring as a spacer, and I undercut the door jam with flush cut saw now. This will let the flooring slide, underneath the trim for a clean look and on the baseboards I’ll cover those gaps with quarter-round that I took off earlier.
I Cut the other side of the door too, and I cut into the baseboard a bit that I could slide the floor in cleanly under The whole jamb, so that wasn’t just a mistake. I did had on purpose Now. Next, I measured the transition channel for the door opening it has marks on the back where it’s supposed to snap cleanly, But it just bent when I tried to do it, so I grabbed a hacksaw and not cut to size instead.
I positioned the channel so that my finished transition piece would just hit the middle door stop. Then I secured it to the floor with screws and During my layout. I decided to take two and a half inches off the width of my initial starter row, And this will give me two and a half more inches of width on the other side of the Room to avoid those narrow strips That I mentioned earlier you’ll see that in just a bit Now my walls aren’t exactly straight either and I needed to account for that.
In this cut, I used the vinyl sheet design as a straight reference to lay the planks on, and I measured the gaps across the wall. If you’ve taken up the flooring or don’t have a reference line, You can always snap a chalk line and use that to reference.
The measurements. I Mark the first plank on both ends for this angled cut line. Vinyl plank flooring can be scored and cut with the utility knife, So I went ahead and grabbed my t-square to score the plank between my two marks.
The problem I found is when trying to snap the plank along that line, since I couldn’t really grab it and pull it up to snap it. I put a piece of scrap wood underneath the score line and Just beat on it with my mallet until it snapped.
As you can imagine., This went pretty badly. I quickly realized that scoring and snapping for the long cuts is not a great option. So instead I took it down to my shop and I laid out a new line That was a quarter inch in from that jagged mess that I just made.
Then I used a circular saw to cut the line and it turned out great now really. I was just trying to avoid using power tools as much as possible, But using a jig saw table saw or circular saw, is really the only way to go here.
The final plank is a floating floor and it needs to be held off the walls, a quarter-inch in all the directions. So to do this, I use these wedge spacers from the flooring install kit that I link and I taped them to the wall.
I laid down the first plank under the door jamb, but it was still a bit far from the metal channel. So I marked the piece along the door jamb and I used a jigsaw to quickly trim off that corner and then it fit in there.
Nice and smooth and The next piece gets dropped in and locked into that first piece and using a tapping block across the front on the seam Aligns the boards flush with each other, and this got me to my first partial board.
I measured the gap to the wall and I transferred it over to the board. Then I used a 12 inch carpenter square to score line on the plank with my utility knife.. I flipped it over and I snapped the plank by pulling up on the hand while supporting it behind that scoring line To finish the cut.
. I flipped it over and cut through the backing to release the piece. When I snapped this board, It really turned out a little bit jagged. It was because, when I scored the plank the second time, the blade veered off that original line a little bit So make sure if you’re gonna go over it twice that you stay on, that original line or you’re gonna need to clean up the edge.
Like I’m doing here, Hey If you like what you’re seeing so far and you haven’t done it already Go ahead and hit that subscribe button and ring that bell for some more great content.. I cut this small piece, the same width as the other first row boards, And then I installed it on the end now to pull the board tight, I used this small pull bar that hooks over the end of the board and helps you pull that into place.
Using a mallet now to start the second row, I cut a full plank down to 18 inches long, and This time was a lot more careful scoring that line and the piece snapped nice and clean Connecting the boards from here on out is pretty easy.
You just angle the tongue on the long edge into the groove of the road before it, and then you lower the plank and tap it into place. Using this tapping block from that kit that I mentioned earlier, a Few taps with a non marring mallet across that short seam also is gonna lock it into place Now working in a small room has a lot more stops and starts, because I could only put Down One or two full boards in each row before needing to make another cut At the end of this row, I had a really small cut to make off the end to make my board fit, And you can’t really score it and snap it because it’s just Too short, So go ahead and use a circular saw for this as well After I got the first two rows in.
I use some dumbbells to weight them down and keep that floating floor from moving as much There’s only so many different patterns on these planks. So I made different piles of them in the room to help keep the floor as random, as I could So when I came in to grab a board I’d rotate through them, so that the similar planks weren’t close to each other.
This is a great way to make sure that your floor looks as best as it can And while I’m working my way down these next few rows., Let’s talk about today’s sponsor Filter, buys a family-owned business, making hvac filters here in the US, and they have a Great origin story: Their Factory in Talladega Alabama has been in the family for three generations And they actually used to make parts for US tanks in World War.
Two in 2008, The factory almost shut down, But one of the grandsons of the original owner felt compelled to come by the facility from his grandfather and save the local jobs They switched over to making furnace filters.
And now they have over 600 sizes in stock, with free, 24-hour shipping and custom sizes available. I have a link down below in the description where you can find out more and thanks filter by for sponsoring this video.
When I got to the other door jamb, I had to notch the piece like before I Laid out the plank and I transferred marks where the door jamb was and how much I needed to take off. And when you’re doing this, I always try to err on the side of taking off too little versus too much so that you don’t get stuck with any big Gaps.
But after a few back-and-forth, I had it fitting really nicely to install the plank. I slid it up close to the door jamb and then locked it in place with that prior row. Then I used the tapping block on the end of the board and just tapped it in place until it slid all the way into The trim as you’re working through the room.
You can start using some of the offcuts from one in the room to start or finish the other end of the room. Keep that in mind to make the best use of your flooring. So you don’t have a bunch of scraps that you have unused at the end, It’s a little hard to see here, but I’m really staggering.
The seams of these planks. Randomly You want to avoid having a consistent spacing between seems like a brick laid pattern, because it just won’t look natural to the eye, And when I got to the bump-out on the other side of the room, I measured and marked the planks for the knotch.
And this corner was way out of square, So I made sure to measure at the beginning and the end of each side of that notch I made the angled cuts with my jig saw and taking that extra time Gave me a great fit When I got back To the sink vainly, you can see why I made that first road narrower than the full-width, because if I had have started with a full width plank, Then this little sliver in front of the vanity would have been under two inches.
I Also planned the staggers that I didn’t need to notch this narrow piece either, And I would just have a small notch on the next full-size plank Planning. These little details ahead of time is really gonna make your flooring install, go much smoother and look a lot nicer now, if you have a board that doesn’t want to lock into place, make sure to check the tongues and the grooves for debris a Little bit Of flooring got stuck in this groove and it kept it from seating properly Now.
Another little surprise in the install was this overflow drain in the floor. I’M gonna work around this, but if you have a floor outlet or another obstacle to work around, you can use these same steps.
I Measured the distance off the side of the cabinet and off of the back wall and Mark the plank. Then I used a Forstner bit a little bit larger than that pipe in the floor. The final flooring is pretty easy to drill through with normal woodworking bits.
So it goes pretty quickly And next I laid the board in place and I finished the row before putting an extension onto that drain. I just marked it and cut a one and a half inch to one of the quarter, inch PVC down pipe to length, and I installed It just below the surface.
I added a little bit of caulk around the edges and that gave me a nice watertight seal and it looks way nicer than that one Did before it and the water will have a place to go if it ever leaks. Out Now from here, I could reinstall my quarter round molding in my carpet transition, since this is a floating floor, Just make sure to nail into the baseboards and not into the floor when you’re putting on that molding and I cut the final transition piece to size And I see the lit in that metal.
You channel that I installed earlier with my mallet. This floor really brings the laundry room together.. It looks awesome in here. I think installing vinyl plank flooring is a great option for an easy install with a big impact and you’ll have some really durable flooring.
Hey if you want to see how I did that wainscotting in that room or how to tile a bathroom. I’Ve got a playlist for you right there with home renovation projects. I’Ve got another one for you down there as well that you might like until next time, guys.
Hey guys, how are you it is currently Wednesday for you, and actually it’s also Wednesday for me and um. I thought this week. I would make a little bit of progress on my living room because there’s just a couple things that need to get done to the accent wall for it to really, I think, fully come together.
Actually, let me show you also, I’m just enjoying my cup of red rose tea. My favorite type of tea so delicious, it’s an orange pico and I don’t like any other brand red rose all the way. So i know i need to do something here.
I was initially thinking of putting art on either side of the door, but now i’m thinking, maybe i should add, curtains and really just frame in the view that you have right when you look out which is trees, i mean you can’t see see if i focus Focus you kind of see that there’s like a tree view there, which is really nice, now focus back on me, hello.
I need to figure out something for that wall and then the other thing i need to do, obviously – which i think is what i’m gonna do this week over here this wall. Behind the two chairs i plan to do a wood panel wall, which i think is gonna look really really nice.
I did go ahead and pick up wood in the last video, as you saw, and so now i think it’s just about staining it waiting for it to dry and putting it up. Let’s go okay, so here is the plan for my wood flat wall.
I have all the pieces of wood right here behind me laid out. I think i actually bought a few too many, because i was initially anticipating the spacing between the pieces of wood to be smaller, but i think it should be a little bit more, but that’s.
Okay, it’s always better to have a little bit more than a little bit too little. So i’m going to go ahead and stain the pieces of wood. I picked up Varathane Early American, which is a color that i like quite a lot, and the goal here is to achieve a wood color that kind of matches the color of the faux wood beams that i have in the bedroom.
I mentioned this before, but one of the things i’m trying to do in this apartment is kind of carry some of the tones throughout the apartment to create a more cohesive space. Overall i felt like in my last apartment i had just started to do that, and it’s kind of one of the ways that you can make your space feel like it all goes together like each room.
They can be individually different, but then they have certain things, that kind of repeat certain tones. That repeat – and i think it just has a really nice effect. So that’s the goal here and i’m out of breath for some reason.
It’S really warm in this room. So i might open the window, so this is going to take longer than i anticipated. Oh before. What can you do? Okay, so, okay, very tight on my face. I need to take a break because my shoulder is killing me.
I’M unexpected for that to happen, but for me very expected, because it’s like a lot of repeated movements, but i’m just going to take a break and then hopefully, when i can come back, my husband can help me a little bit to make it go a little Bit faster because i just did 10 by myself and it just took a little bit.
It just takes a little bit longer than i expected. I think i have a helper okay, so we are actually running extremely low on stain, like literally. Nothing is dripping out of here and we’re just trying to make do to finish.
The last piece of wood like fingers crossed we’ll just scrape five but yeah. This is why i usually like to have an extra can of stain, just because i find it so hard to really tell how much i need and then, if you go over, you can always return the extra can, but in this case really running low.
So we’ll see, there’s literally nothing left in here and good news for us. We did manage to finish all of the staining, with the limited amount of stain that we had left so hallelujah. I am so pleased about this time to get out of this room and let all of the stain dry together ooh, it’s so pretty out here so lovely good morning.
It is now several days later. Actually, i should say good afternoon: it’s 1 48., but it has been several days and i’ve just kind of left the wood pieces in that room night after night to air out into off gas from the stain.
That’s essentially what i’m doing when i’m trying to leave it like for quite a long time without being in my actual living space, because the off-gassing is toxic. Essentially so if you can smell it, it’s probably not done, and that means that vocs are going into the air and that’s toxic for your health.
So i’ve kind of left that there for as long as i can the window has been open and it’s been airing out day after day. I don’t think i can wait any longer. So let’s go ahead and let’s check to see how bad the smell is.
Fingers crossed it’s either gone or not that bad must close the windows. It is extremely cold in here i am like shivering. It is so cold, but that’s okay, right now. What i’m gonna do is. I guess i also.
Let me just show you what the coloring is looking like a little bit variable, that’s probably because i didn’t use like a wood, conditioner and also it’s pine and pine tends to do this, so i guess i’m going to just start taking these out to the living Room because it’s cold in here, so i don’t want to continue working in here, so i’m just going to take them out and then we’ll move to the next steps.
So strong, let’s go! Oh also. I didn’t stain the bottom side in case you’re, just noticing that now only the sides and the top, not the bottom. So i now have all of the boards behind me and i pulled out my little stash of command strips, which is like a jumbo pack that i got from costco this time, except i’ve had this for months, just like just in case.
I ever need to hang something impromptu. You know i just did some simple mathematics and realized. I do not have enough command strips, but i don’t think i’m gonna. Let that stop me and also my mom is not home and i can’t go to the store to get any additional command strips, so we’re just going to proceed and put on what i can for right now and then see how far it goes.
You know – maybe maybe i should ask my mom – hangs up to 15 frames. This is a time-consuming process when you have to do it like 40 times. You know one two, three, four, five, eleven twelve, thirteen, eight twenty nine thirty.
I have thirty. That means i can do fifteen right now. Oh also, i just to update you. I brought the boards out here and i can’t smell the stain pretty much at all, so we’re good okay, so i think i’ll just do what i can right now and then i’ll get more tonight.
I don’t know, oh also. Let’S all please observe this dying. Greenery pot that i need to change and i actually have the greenery to change it, but i’ve gotten so lazy and now they’re turning yellow because they’re also in the sun, so just wanted to highlight it and now we’ll ignore it.
3M command. Ships can sponsor me at any time. You know if they want to send me free command, strips that’d, be nice too spent a small fortune on them, don’t regret and now to make them all stick down because you’re supposed to press these down for like a minute.
So ouch, so now what i’m gonna do is beauty. So one thing i didn’t actually mention about this wall is that it has a phone jack here i actually have a landline and i love it. So don’t come for me. Okay, there’s no way to avoid it all together, so i’m hoping that the piece of wood will somehow be able to sit on top of this, which i’m now looking at it.
I don’t know that it will be able to, but that was my hope and then that i wouldn’t have to cut it, but if it does overlap then i will have to cut it so far. This has still worked. Pretty well feels super secure.
So one panel up and ready to go so good morning. It is now the next day and all clearly, as far as i got was putting up one beam and then i got stuck and my husband and i just spent the last, like 30 minutes, trying to figure out different items that we could use to space the Gaps between the pieces of wood and i think we landed on using his phone.
I also picked up some extra command strips i’m gonna put these on and then we’re gonna put them on should be good. Also, it’s a beautiful sunny day. Oh so i can’t complain. Okay, are we ready so we’re gonna use your phone as a spacer yeah? Oh my god, i’m so uncoordinated.
Today, okay, oh no! The bottom has sucked the bottom. That was stressful, cool all right next next one. So, oh my god, my you, no we’ll have to stain this one later, because i guess this end was stained, but this end wasn’t what monkey the full view is even funnier all right, my next! I have no clue you guys.
I don’t know what to say. Other than i love it literally, i love it so much. I think that it just matches so well with the vibes of the wood beams in my bedroom, and i just feel like it ties the place together so much more.
Obviously, i still have some remodel work to do, because i need something i think to go in the center of the wall. I also need some new cushions here. I might build a bench or some sort of console right behind the chairs, but i absolutely love it.
I think it’s stunning, this is where i sit and do my work usually – and i have my little stool next to me – and i do this before i do this fun fact. Oh, and in case you were wondering you cannot see the command strips from the side.
I was worried, you’d be able to see them, can’t see them on any of them, including the last one which has the edge facing well facing us. Okay, bye,
00:00:37 This is what our home office currently looks like. We’re newly moved in and there are still unpacked cartons. 00:00:46 My husband has a height-adjustable desk since he works from home often. We built some Ikea Platsa wardrobes to act as bookshelves. 00:00:52 There’s so much more to do, so let’s get started! To add more functional storage to the room, I’m building some drawer units. 00:01:10 We’ve never used the Platsa system from Ikea before. I was pretty surprised by how easy the assembly was. 00:01:20 (But my fingers were in a bit of pain at the end, hehe) I’m turning part of this row of cabinets into a desk area for myself, so I’m adding height using these wooden legs I found. 3 boxes, completed~ Since our floor isn’t straight, the cabinets don’t line up perfectly but luckily the cabinets come with a connector. 00:02:09 To add some character to the cabinets, I’m first sanding the doors with 200-grit sandpaper. My plan is to add a piece of thin trim on the edges to create a thinner shaker-style door. To stick the trim, I’m applying a bead of glue across the trim. I used quick-dry wood glue since the trim is only a decorative element. 00:03:20 Before painting, I’m adding wood filler to hide the seams. I chose a creamy oatmeal color for the drawers to add some character, while staying neutral. I have two options for knobs and I love them both! Hmmmm Can you guess which knob I chose in the end? Brass mushroom wins~ To make the tabletops, we got 2-metre blocks of spruce wood and cut them down to the size we need. Before staining, sand along the grain with 200-grit sandpaper. 00:04:33 I recently discovered that staining goes much faster with a sponge. Sand again after the first coat of stain dries. 00:04:46 Then apply a second coat of stain. I want to stain and seal this thoroughly since it’s for everyday use. It’s more steps and more time consuming, but it’ll be worth it! Sand once again after stain dries and it’s time to finish this with some hardwax oil! This step is optional, but it protects the wood effectively. After applying a thin layer, wipe off with paper towel to remove excess and let dry for 24 to 48 hours. After 48 hours, I’m buffing it with 1000-grit sandpaper. 00:05:51 This makes it extra smooth and comfortable to use as a computer desk 🙂 I’m marking out where to mount the table legs and using an old lipstick to figure out the exact spot I need to screw in. Tadaaa~ I found some turned legs at the hardware store. They add a vintage-y feel that I love. Pat had to work at the “real” office this week So I could work on the home office a lot more without disturbing him but that meant I had to do a lot of the heavy lifting on my own. 00:07:17 I got a good arm workout from this room makeover, haha! To stain the legs, I’m first using one coat of the same teak stain. This was much more tedious than the flat tabletop, but was also quite a meditative process 🙂 To finish it off, I added a thin coat of dark walnut stain to bring out the wood grain and give it a warm vintage look. 00:08:07 Time to add the other half of the table. This room is right next to the front door, so I’m adding a rod and hooks for Pat’s work bag and our everyday coats. 00:08:51 The rest of the bookshelf is used for storing games and puzzles, most of our stationery and temporarily, some of my craft supplies. Now that I’m roughly done with organizing the bookshelves, we can work on the doors! I’m painting them as well, so it’s time to get sandy again 😉 To have some design continuity, I added the same thin trim to the doors. 00:09:46 For the doors, I decided to go for a cream white color. The difference on camera is very subtle, but the warm undertones of the cream will make the room much cozier! Installing these doors alone was probably the toughest thing, haha If you’re into diy-ing, consider investing in a laser level. 00:10:30 It’s useful for many things, including marking knob holes. I chose simple T-shaped brass knobs for the bookshelves. 00:11:20 We have a collection of vintage books that we want to put on display so we got two floating oak shelves to create a little “library” moment. 00:11:32 To easily find the points for drilling, I’m using some frogtape. First, mark the holes on the tape. 00:11:51 Using a laser level, transfer the tape onto the wall. I’m using a book to estimate where I want to hang the top shelf. 00:12:11 Paranoid me almost always double checks if the line is level. But of course, it’s perfect~ These shelves are solid oak, and soooo heeeaaavvvyyy~ They are probably the thing I’m most excited for in this room because we can finally put out all these beautiful books. It’s like our very own mini library 🙂 Pat is sorting out the cables below his desk. 00:13:08 He’s doing a great job so far ^^ We decided to use the light from our old entryway. It’s time to pull the rest of the room together! Next to Pat’s desk, I’m hanging a print we thrifted a long time ago. 00:13:29 It’s of a 1901 event in Darmstadt, a city that’s special to both of us 🙂 I’m happy we finally have a proper home for this piece! I made a door with a loose-weave fabric to hide my computer but still let the heat through. 00:13:52 I also added a few functional pieces like this hanging paper organizer. 00:15:52 I didn’t think that the office would be the first space we finish, but it actually makes sense. 00:16:00 I’m really happy that we have a workspace that’s cozy and inspires us to be productive It’s filled with things that represent us, and I could ask for nothing more.
– Zach. We are going to help you surprise Maggie with a brand new home office makeover. – [All] Three, two, one. 00:00:08 (dramatic electronic music) – No! – Welcome to Try DIY, the show where we transform our friends’ forgotten spaces into beautiful new interior, using the power of DIY. Ariel knows what she’s doing, and I’m her husband. Why DIY, Ariel? – [Ariel] It’s cool to be able to do something yourself. Also, rewarding. 00:00:28 – [Ned] And it saves money. 00:00:29 Each episode, we’re gonna listen to what our friends need, and then, set them up with the DIY project that’ll help them save money and be awesome. – Right. 00:00:37 This show is about making our friends awesome. 00:00:38 (upbeat music) (knocking) (light music) – Hello. – Hi! – [Ned] So let’s talk about Zach and Maggie. – Ooh. – Ooh. 00:00:50 – Let’s dish. – Ooh, dish. – So Zach and Maggie. 00:00:52 – Zach’s secret girlfriend Maggie. 00:00:54 – [Ariel] They’re not new, but they’re new to the internet. – [Ned] Mm-hmm, they just moved in together– – That’s a really big deal. 00:01:00 – That’s a big step. – Maggie and I have been dating for two and a half years. 00:01:03 We moved in together about six months ago? – It was actually a really easy transition. I was nervous, but. – What were you nervous about? – I don’t know. 00:01:11 – It’s really amazing living with an angel like me, ’cause I just give you so few things to be frustrated and angry and upset about. 00:01:17 – [Ariel] That’s really funny, ’cause it sounded like you were gonna say, living with an angel like Maggie. – Nope. (Zach laughing) No, I knew it was coming. (laughing) – When we moved in here, this place was not in the best shape. 00:01:27 We joked that it was kinda like a fixer upper apartment. The floors were scuffed and scratched, the walls were this putrid yellow. 00:01:33 It’s really been a constant redecorating of this place. We have a mix of pieces that we bought, and then, things that we found at thrift stores. 00:01:39 – I like neutral colors, I like the clean space. I don’t like to see a lot of clutter. 00:01:44 – She hates clutter. – I hate it. I hate it. 00:01:46 – [Ariel] I saw Zach’s apartment. 00:01:48 This is like 99% Maggie. – [Ned] I was like, I don’t think you need our help. This is beautiful. – Yeah. – What’s wrong about it? What’s the problem? – So Maggie was in charge of this room, and the bedroom, and the kitchen and the bathrooms, and then, I was in charge of the guest bedroom. I pushed to have a two bedroom apartment. 00:02:07 I’ve never had a home office, and so, I was like, yes, finally, I’m gonna have a place where I can, you know, be productive on the weekends, and work on other creative projects. – Well, let’s check it out. – Uh-huh. – Let’s go. – Uh-huh. 00:02:18 – So this is our home office. (dramatic horror music) (screaming) – Maggie has a very particular aesthetic. I just learned what that word means. 00:02:30 This room also has everything that we weren’t quite allowed to put in the rest of the house. 00:02:34 So you have all of my reject movie posters. The original patents for LEGOs. My old boops and bops. 00:02:41 – What are boops and bops? – Boops and bops are like, you know, like miscellaneous like knickknacks. 00:02:46 – You have a whole box full of miscellaneous knickknacks that you call boops and bops? – I kinda told her that I’m gonna take on this room. It’s gonna be my responsibility. 00:02:54 – Oh, there’s stuff inside the dresser. – [Zach] Yeah. 00:02:57 – [Ariel] Like this is like craft supplies. – Yeah, I mean, some of this is mine, some of this is Maggie’s. 00:03:01 I feel like I’ve let her down. 00:03:02 She would never say that, ’cause she’s too sweet. 00:03:04 I did a little home DIY. 00:03:07 We have our Wi-Fi box. 00:03:09 – [Ariel] You have a rug, and it’s rolled up on the floor. – Yeah. 00:03:14 – So Zach was in charge of this room. 00:03:15 – All right, all right. 00:03:17 Her happiness and her mental well-being is dependent on calm and order in the home. 00:03:21 Having this unfinished room is just like this nagging little thing in the back of our brains that I know upsets her. 00:03:28 – Well, today, Maggie, as a special surprise, Zach is going to redesign this entire room with our help. You’re not gonna be able to see the end until it’s all done. Relationships are about compromise, and so, we’re gonna try and be the glue that holds them together. 00:03:44 – I feel like I know what you want. – Yeah, uh– – I’m gonna make you proud. – We’ll see. 00:03:49 – We’re doing nice things for our friends. – Yeah. 00:03:51 – Because we’re such good people. 00:03:52 – Yeah, we’re humanitarians. – We save lives. 00:03:55 – Do you believe in us? – I believe in Ned and Ariel. (all laughing) – Fair. 00:04:00 (upbeat music) – We know what Maggie wants. – Uh-huh. – But I want to talk about what you want. 00:04:05 – I need a home office, I have a standing desk that I bought, but I just need to make it comfortable and cute and somewhere that I can work on the weekends, and feel like this is a place that I can be productive. 00:04:15 – So you wanna leave work at work, and then, also– – Come home to work. – Come home to work. 00:04:20 – Our challenge is gonna be figuring out how to incorporate all of these things from our old lives in a way that feels– – Natural? – Aesthetic. – Okay. 00:04:30 That is not the correct way to, yep. – Yeah. (Ariel laughing) (upbeat music) So now that you’ve seen their space, what’s the plan for the makeover? – [Ariel] Well, let me tell you. Zach wants it to be an office. – Right. 00:04:41 – So we’re gonna keep that desk in there. 00:04:43 Basically, just make the room look nice around that desk. We’re gonna put the desk over by the window, we’re gonna put storage on both sides, we’re gonna put a big rug in there. 00:04:52 This is the rug that Maggie has actually already bought, which is great, because it gives me an idea of the colors that she wants to use in that room. 00:04:59 What are we doing for Maggie in this room? – Maggie loves DIY and crafting, and so, I want it to be an office for me, but I also wanna give her a space for her. She always says that everything has a home, but I think she would be happier if we had like, is credenza the right word? – Sure. – No. – [Zach] Great. 00:05:15 – We are going to build Maggie a fold-down craft table. I think it’ll be really, really fun for her to have her own little space, where she can store things that doesn’t have to use Zach’s desk to work on her stuff. – This is all great, but I’m not seeing a ton of storage for Zach’s boops and bops. – Well, I’m planning on getting rid of a lot of that. – Nice. – Mm-hmm. 00:05:33 – [Ned] Well, we can make this work. – We can make anything work. 00:05:36 – You can make anything work. – Pow. (upbeat music) – [Ned] So are you ready to clean out the room? – [Both] Yeah! – [Ned] It wasn’t freeze frame until Ariel popped her hand up. 00:05:48 – So I have, you know, books, and there’s a lot more where this came from. 00:05:52 – First of all, you have two of “A Confederacy of Dunces.” – Well, that’s just, yeah, I mean, that’s a good book. – Let’s talk about some of that stuff that they are collecting. – Sure. – ‘Cause Zach has a whole bunch of stuff that he calls boops and bops. – (mumbling) version, arguably my favorite movie ever made. “Spice in my Pocket,” there’s some really good facts in here. I never even watched Star Trek. – Toys. – Toys. – It’s toys. 00:06:12 – This person made Nic Cage as different Pokemon. – Ay yi yi yi yi. 00:06:17 He can boop them, boppa here. (groaning) I’m sorry. 00:06:20 I’ll see myself out. 00:06:22 What are we gonna do with the boops and bops? I can’t believe I just said it like that. – Boops and bops. 00:06:27 – Maybe we keep the boops, but we throw away some of the bops. – So I should get rid of my LaserDisc copy of “The Lion King”? – Probably. – Yeah. 00:06:35 – I have a ton of records, and we don’t own a record player. Maggie actually loves records. She has a ton, too. 00:06:41 It’s a Hebrew copy of “Captain Underpants,” but how fun. It’s backwards. 00:06:45 – Actually, Zach asked us several times– – Yeah. – If you collected anything? – Right, and I’ll tell you what I do collect. – The answer was yes. 00:06:55 – My board game bookcase. But Ariel made me put it away in a bookshelf. That was actually kind of hard to get to. (groaning) – You see what I did there? – An ugly Hanukkah sweater called Llamakah, oh Llamakah? – Well, actually. – That’s pretty fun, we have matching, a Christmakah and a Llamakah. – Do you guys have a box of Christmas stuff? – It’s pretty good. – Do we have a box of Christmas stuff? How dare you ask me that in my own home. 00:07:20 – It was difficult to get Zach to eliminate some of the sentimental items. 00:07:25 – For about five years, I kept every cover of “Entertainment Weekly.” – Zach, what is the plan with these? – I don’t know! I’m learning how to share my life with someone, and a big part of that is realizing that this place isn’t just my home, it’s our home. – You could take all of this and it could be a metaphor for a relationship. – They each have a bunch of stuff from their own individual lives, but now that’s a challenge as to how are they gonna combine that to really make a space together? So Zach, why do you think you keep all this stuff? – I don’t know. 00:07:56 Dumb things give me joy. They always have. 00:07:58 Maybe it’s because I’ve always felt weird, and so, I like surrounding myself with weird things. – You surround yourself with stupid things because you like feeling stupid? Why don’t you surround yourself with orderly, beautiful things– – Yeah. 00:08:13 – So that you feel really beautiful? – Boom. 00:08:18 – Yeah, all right. (upbeat music) I think my goal for the rest of this video is figuring out ways to marry my old self with our new self. Okay, goodbye “Eternal Sunshine,” goodbye “Lion King” on LaserDisc, I’m keeping this. This is my old tax information, that’s probably trash. – What, what, well, wait. 00:08:39 By us transforming his guest room, it’s basically gonna save this relationship. 00:08:44 Do they give out Nobel Peace Prizes for YouTube videos? – I think they do now. – I think they do now! – Wow, okay, we did it. 00:08:52 Empty room. 00:08:54 – Okay. Here we go. 00:08:56 – Not so fast, Zach, my boy. 00:08:59 It’s time for your DIY project. – Oh wow. 00:09:04 – So let’s talk about the DIY project. 00:09:05 How are we gonna make this fold-down desk– – Sure. – Thingy? – [Ariel] The first step is building the frame. – [Ned] And you already precut the pieces. 00:09:13 – I precut the pieces, I pre-painted the pieces. – Love it. – I’ve basically done all of them. 00:09:16 – Just the way I like. 00:09:17 – (laughing) And once we’ve built that, we’re going to put the hinges on, so that we can have the fold-down tabletop. – Mm. – Since the front of it is basically unfinished, because it’s the bottom of a tabletop, I think we should put something decorative on there, and so, I was thinking stick-on wallpaper, but you can put anything on there. 00:09:36 You can put a piece of art, you could put, I mean, truly, anything you want, and then, the very last thing is we’re gonna put in a safety latch so that when you put the tabletop up, it stays. – You know what? When you say it like that, it sounds pretty easy. – It’s not that hard. 00:09:54 – Okay, so I just gotta do a right angle, with this on the inside. 00:09:58 I have these lined up, I think. I’m so terrified right now. 00:10:02 – [Ariel] We’re using power tools so he needs to be careful. Zach, I feel like, you give him something heavy, he falls over. – Okay. 00:10:07 Hold on, I’m gonna do this with my body, push it like this, and then, use maybe the drill in my mouth? First incision. 00:10:16 (drill whirring) Holy shit. 00:10:18 (laughing) This thing is powerful. I wanna surprise her, but also, showing her that I’m committed and that I can rise to this challenge, and be the man of the house that I was born to be, dammit! (drill whirring sporadically) Work it. 00:10:35 Ariel, you wanna come get eyes on this real quick? (drill whirring) – There. Nah, totally fine. – Okay, sick. 00:10:41 Then I’m crushing this thing, get outta here. 00:10:43 If you thought that I was gonna fuck this up, well, then you’re a loser. – Oh my God. 00:10:49 Do you think Maggie’s gonna be proud of you? (drill whirring) – I think she’s gonna assume that you did most of the work. – Will Maggie like it? – Hmm. – Yeah. – That looks nice. – Yes. 00:11:00 – [Zach] I am afraid to, if I, I guess you just gotta commit, right? – Yeah, you just gotta commit. Just go for it. 00:11:06 – Is this a metaphor? (all laughing) – It’s a giant metaphor for your relationship. 00:11:09 Oh my God. (Ariel laughing) You know what they say? Measure once, cut twice. – They don’t say that. 00:11:16 – This is a bad position to be in for a long time for a boy with a bad back. 00:11:20 – I’m just hoping I don’t get a boner. – (laughing) What? – Your wife is right here. 00:11:25 Be cool. – Be cool, man. (drill grinding) – That’s a fun sound. (all yelling) Nice! – Look at that. (smooth music) Zach is actually doing pretty well. 00:11:40 He is struggling, yes, but he’s really determined to make it work. 00:11:45 Ooh, it’s like fake wood. – It’s like fake wood. – This is totally– – That’s Maggie. – [Zach] Maggie aesthetic. 00:11:49 And I just peel and stick. 00:11:51 Whoa. – Ooh, wow. 00:11:53 – Okay, I’m down, wow. – It has texture. Nice job. – That was easy. 00:11:58 And this is gorgeous. – Right? – I know that he was worried about this, but he really stepped up his game. – [Ariel] Zach did a great job. 00:12:03 – It’s like a baby changing table. – Except the baby could fall off. 00:12:07 – I rolled off the changing table, and I turned out fine. – Huh. 00:12:11 All right, Zach, you did a great job with this folding table. Oh, look at that. 00:12:16 Oh, that is really nice. 00:12:17 Now, it’s time to put on the finishing touches, which means we’re gonna need some montage magic. (Ariel and Ned humming) ♪ Gonna give you everything ♪ ♪ Gonna give you everything ♪ ♪ Gonna give you everything ♪ ♪ Gonna give you everything ♪ ♪ Oh, oh, oh, eh, oh ♪ ♪ Oh, oh, oh, eh, oh, eh, oh ♪ ♪ Oh, oh, oh, eh, oh ♪ ♪ Oh, oh, oh, eh, oh, eh, oh ♪ – I was a little bit concerned about certain things. I thought maybe there was gonna be too much stuff, but I think we managed it. 00:12:56 – [Ned] This is like a very special time in their relationship, and now, having this room be completed? It’s gonna really mean something. 00:13:04 ♪ Gonna give you everything ♪ – [Ned] Okay, we’re about to surprise Maggie. How are you feeling? – Guys, I feel really good. 00:13:14 This room looks amazing, and thank you guys for all the help and the guidance– – Of course. 00:13:18 – And making this come together. 00:13:19 I’m just so happy. 00:13:20 – But do you think she’s gonna like it? – I think she’s gonna love it. 00:13:23 I honestly, I look at this room, and I think it’s actually a really beautiful amalgamation of the two of us. I guess there’s only one thing left to do, and it’s see if she likes it. – Let’s bring her in. 00:13:32 – Yes. – Are you ready? – Yes. – Okay, close your eyes. – Okay. 00:13:36 Oh, I can see– – No, no, no, close your eyes. – Keep your eyes closed. – You’re such a cheater. 00:13:41 You’re so bad. – You’re so mean. Just let her see. – I wanna see. 00:13:45 – Open your eyes– – In three, two, one. – Wow! This looks really good! I love it! – [All] Yay! – [Maggie] Wow! Wait, it looks so much bigger. 00:13:59 – [Zach] So we have a work area for me, so I’m gonna be, you know, tippity typing away, but also, we wanted this room to be functional for you, so craft storage. – Ooh! – And a craft table. – It’s like a Murphy bed! I’ve always wanted one of those. 00:14:12 – [Ned] So that was a DIY project that Zach did for you. – You made this? – Mm-hmm. – I had a little bit of help. 00:14:17 So what do you think, Maggie? – I love it. And we’ve completed the house. 00:14:20 – [Ariel] Yay! What this room shows is that you can keep your stuff, your LEGOs, your boops and bops, and it can still look really nice. 00:14:28 – [Maggie] You found a way to incorporate his movie posters. – [Ned] Yeah, there’s still some elements of the beeps and boops. 00:14:33 – Yeah! – Boops and bops. 00:14:35 – Boops and bops. – Ooh! We got a record player? – Oh, and this is the best. This is a Ned invention. 00:14:40 Wi-Fi! – How did you do that? – Drilled a hole in the back,. – You guys are so smart. – It was my idea. – It was my idea. – No, it was my, 100% my idea. 00:14:50 – [Zach] You did such an amazing job with the rest of the apartment, I wanted to do this to show that I am equally as committed to making this home a fun home for both of us. – Thank you. 00:14:59 You did a really good job. 00:15:00 – Yeah! – Yay, we did it! – This room’s great, ’cause it’s got so much of Zach’s dumb stuff in it, and it makes me inspired that I can bring some of my dumb stuff into our living room. – Okay. 00:15:18 (upbeat music) – [Ned] Ariel’s sister Danielle just moved to Los Angeles, and she is living in a studio apartment. – It’s very small. 00:15:27 When I eat, I sit on the floor. – On the floor? – [Danielle] I mean, it’d be nice if I could show off my place. 00:15:32 – [Ariel] We are going to give her a surprise makeover. – We are secretly here– – Well, she knows we’re here. – She does know we’re here, but we’re gonna do whatever we want. (upbeat music) The thing she loved the most was the hidden Wi-Fi cords. Like it was my idea, and then, I like– – No, no, that was, I just, I need you to tell, to tell everybody that it was my idea. – [Zach] Why you guys both trying to take credit for my idea? – No! (Zach laughing)
00:00:01 Hey Remodelaholics! Welcome back to our channel. 00:00:04 We spend a lot of time touring beautiful homes, like we actually plan our family vacations around the home shows in our favorite areas. 00:00:12 So today we want to take you on a little tour of some beautiful laundry rooms. We’ve done a video tour like this before of our favorite bunk rooms, so you can check that out here. 00:00:23 We’re featuring 19 of our favorite laundry rooms and ideas that you can use in your house, even if your laundry room is much smaller than some of these. 00:00:32 Check the description for the link to the blog post for more information about the builder and designer, plus more photos and links to some lookalike products, and even more laundry room ideas! And be sure to keep track and tell us what laundry room feature you love most down below in the comments. 00:00:51 First up, this simple modern laundry room has a beautiful color on the cabinets, fun patterned floor tile and this amazing laundry sorting station! The rolling laundry bins each have a spot under the folding counter as well. 00:01:09 Here’s another way to add some fun color and pattern to your laundry room with wallpaper! The newer removable wallpaper is nothing like the old stuff that was a huge pain — so we love this trend. This laundry room also has beautiful wood cabinets, dark countertops, and a unique embossed subway tile backsplash. 00:01:33 Number three. This next laundry room is big and beautiful! Light countertops and white cabinetry help the space feel even bigger and brighter, and the small subway tile backsplash is a nice neutral while still adding a little color. And the chandelier. A laundry room is a great place to add a beautiful statement light fixture. Number four. Love these hexagon floor tiles! The cabinets here are a little more green for a nice color vibe. A small hanging rod and folding counter make this space just right. 00:02:11 Wait for it…. Yes, this is a laundry room! This alcove with double machines also packs in a lot of storage. Smart for a large family home or a vacation rental space. Laundry room six. Here’s your proof that even a small closet laundry room can be beautiful! Okay, this was a second laundry room in the home, but still. 00:02:41 Start with floating shelves right above the washer and dryer to maximize the space and a storage cabinet to the side and you’ve got a nice minimalist laundry room. Laundry room number seven. 00:02:53 Check out the wall treatment in this laundry room! This horizontal board and batten style wall treatment adds texture and style without being too busy. Oh, and did you see the chalkboard barn door there? Nice Number eight. So much natural light in this room! Love buffalo check? Look at this floor – inexpensive solid color square tiles combined creatively to form a checkered plaid pattern. Beautiful Number nine. We love storage baskets! Baskets on shelves make for easy accessible storage that can adapt to your needs. And look how much storage space this built-in unit around the machines gives. Drawers underneath the machines — real drawers not the skinny plastic pedal drawers that don’t fit much. Brilliant. 00:03:41 A couple of wall-mounted drying racks also give you space for those items that don’t go in the dryer but fold up out of the way when you’re done. Number ten. Love the bold green color of the laundry room cabinets! This room would be big enough for a side by side set of machines, but stacking them instead left lots of room for the cabinets and countertop space. Laundry room eleven Now, this is a laundry room that dreams are made of. So big and so beautiful! There’s a huge TV over the washer and dryer so you can watch your favorite show while you’re working. The TV is framed so nicely I didn’t even notice it was a TV at first! And another beautiful chandelier! We found a lookalike so check out that link in the blog post in the description. 00:04:34 and twelve. This laundry room has a kinda classic modern farmhouse style going for it. Wood floors, black cabinets, keeping it simple. Thirteen. 00:04:47 So many pretty details in this laundry room! The cabinet details, and the lighting, and the shape of corners of the sink backsplash match the vanity cutout…, such a great room. Fourteen I love all the storage in this room, and that countertop wrapping station is so smart. There’s also a desk and a sink, so this room is ready to work. 00:05:17 Fifteen Here’s another fun plaid tile floor. You can get this look using just plain solid square tiles! There’s also lots of cabinets for storage, and a built-in dog kennel. Up above there’s some open shelving and a built-in wrapping station. This would be so easy to build yourself with a few dowels.
Sixteen Here’s a small little laundry room with some big style! I love the diamond tile floor. Stacking the machines is a smart way to save space, and that made room for a folding counter and floating shelves AND laundry basket storage, even in this tiny room.
Seventeen Here’s another nice big laundry room. And this room is well-lit even though there are no windows. There are ceiling lights, task lights, and under cabinet lighting. Having plenty of varied lighting helps brighten the space up and make it cozy.
Eighteen Next is small but packed with features! This little closet laundry room has a double set of machines, plus a sink and storage space. Great for a vacation home or a big family with a small laundry area.
Nineteen We’ll finish out our laundry room tour with another paired washer and dryer. This is a bigger space with a folding counter and lots of cabinets and it’s right off the back door so when you’re a mess from working hard or playing, you can clean up here instead of tracking it through the house. So, which one was your favorite? Tell us in the comments. Be sure to check out some of our other great tour videos and we will see you later!
Hey guys and welcome back to my channel excuse the mess in the background I’m just in my room and I’m really embracing the no makeup Sundays. So today I’m going to be showing you my laundry DIY makeover so today I’m just gonna show you the before and after of our laundry that we did ourselves it was very gross and it required some paint but it wasn’t too hard to do and it is easy for you to achieve so stick around to the end to see the after end result so anyways let’s get straight into my laundry DIY makeover.
So as you can see our laundry really needed a renovation makeover and we did it DIY on a budget the paint was old and patchy in multiple shades of cream which really made it much darker than the room needed to be we also had a worn old shelf and single sink with no bench space or storage space so we really want to shoot freshen up and modernize it on a budget.
Shat I first did was remove the tiles as you can see around the sink area I just used a chisel and a hammer so I’m just quickly showing you how I did it they were really stuck down and normally I find that they’re not as stuck down as this when everything removed tiles in the past so it required a little bit of banging loosening up and then also a lot of chiseling and pulling down.
I did cause a few holes as you can see in the walls so after this I had to put gyprock and then also plaster sheets which you can get from Bunnings or your local home improvement store and then we patched all of it up as well and then painted it white which we did after I obviously removed all the tiles and then after I moved the remove the small shelf because that is where we were going to put our cupboards above the sink that we were going to put in. So this is the remnants after I’ve removed all the tiles and the Shelf of as you can see I did have a few holes in the wall and then lots of tiles which we had to clean up to be able to move on and plaster around and remove the sink.
Next up we installed these flat pack cupboards which we got from Bunnings they’re about 69 and 150 dollars for the top and underneath and then we also grabbed this bench which was $99 we used the entire bench and then cut off the excess pieces of the bench to create the other mini shelf and then James also had to cut the hole in the bench top to place this sink which was just about $150 I bought it online.
Then James went ahead and installed these subway tiles himself as you can see it just created we had some leftover excess tiles that we used from our kitchen so he just did that and then he also installed the leftover wood as a little shelf where we could put our baskets and our additional storage.
This is our renovated DIY laundry that we did we had to buy this single like wooden bench top which isn’t actually meant to be a laundry bench top it was just like a big like wooden bench top that we got from Bunnings and we had to cut it to size which James obviously did so that you can fit your washing machine and dryer underneath although we don’t have a dryer we have a mini fridge this is where we keep dog food.
So this is from Kmart that we got and then we decided we wanted to match our kitchen which is a subway tile backsplash and then we just got a dark grout because we have a lot of like black accented things in the house which is why we even used these black hold us to keep the shelf up and then we also have black handles here on the cupboards when you get a black Sink thought because we were trying to save money so we kept the same tap whereas what was previously in here and then we just got a new sink because it needed it was a very disgusting sink if you would have seen and then we just needed some extra storage in here so this is kind of where we keep our like towels. Some of our towels like washcloths and like the iron and stuff like that and then we also with the rest of the wood that we got from here we made a shelf just to keep like washing liquid and stuff up there so you can see we also got a little baskets just to keep it a little bit more tidy and then we also have our washing basket there which is kind of matches it.
So materials that we needed to get for to do this we obviously we already had these leftover tiles from the kitchens and so we only had to buy the grout the bench top the black accessories and the cupboards that we needed for here and then the sink as well.
We’ve done our whole house if you would like to see our home tour I will link that in the description box although it is a bit old so if you would like to see an updated house tour with some new rooms and new decorations and updated home decor let me know in the comments section down below I was also thinking of doing a bathroom DIY makeover because I am actually currently doing out on the suite at the moment so if you would like to see that please also let comment that down below or comment which one you would prefer to see.
Thank you guys so much for watching my laundry DIY renovation and makeover on a budget let me know what you would like to see next in the comments below thanks guys.
Hello and welcome Today we are showing beautiful kitchens and living rooms. If you like our channel, subscribe and share with your friends In this video, you will see modern, farm-style, kitchens., Decor and design ideas for your country, cottage.
Beautiful blue kitchen, interior design ideas, small kitchen lighting ideas, dining room and kitchen farm style. Large kitchen island ideas for a stylish living room. Living room with fireplace interior design ideas.
Amazing kitchen and dining farm style., Kitchen decor ideas and lighting ideas. Beautiful, fireplace living room, decor ideas. If you like these ideas, you can share with your friends. You will find links to social networks in the video description.
Open shelves large kitchen sink. This is a farmhouse style. If you like these ideas, you can subscribe to our channel Subscribe and watch a new video every week, Thanks for watching Thanks to the musicians for the good music Farm style, kitchen interior design, ideas,
Hello, everyone. I am Caleb with Dansie Design Build, and in today’s video, we’re going to be talking about five different ways that you can make your basement finishing project more affordable. So without going any further, let’s just jump right in.
So if you like an open space, that’s great because that’s actually gonna be a more affordable option. Number two. Finish the bathroom or kitchen later. So you can choose if you’re doing a bathroom or a kitchen or both.
You can choose to just have
the plumbing installed, and the electrical installed in the walls. And then opt to put in the cabinets and countertops at a later date. That’s going to save
a lot of cost upfront.
So number three, choose carpet over LVP or tile wherever you can. Carpet is going to be a lot cheaper per square foot for the materials and labor to install than a LVP or a tile product. Those just take a lot more labor and materials to install.
So number four, if at all possible, leave the load-bearing walls alone. Leave them alone. Load-bearing walls are expensive to move because they require engineering, removing the wall, putting in a beam and moving and doing a lot of work there.
So if you have existing walls, if it’s at all possible, figure out a way to make the basement work without having to move those. That will make the basement
more affordable to finish. And lastly, tie in the existing furnace in with the basement
finishing HVAC system.
So when you’re finishing the basement, opt to not have an additional furnace or air conditioning unit installed in the basement. Basements don’t have very much of a heat load and so normally, the furnace that’s installed in the home can hold that, and accommodate the extra square footage living space that the basement is going to add to the home.
So there you have it. Those are five ways that you can make your basement finishing
project more affordable. Thank you for joining us today and we’ll catch you next time.
Basement tub/shower combos can be a real challenge. So in this video, we’re going to walk you through all the different steps that we took to build one. Lots of really great tips, so let’s dive in.
The first step for us was to determine how unlevel this bathroom floor was. So we placed a 4-ft level on the floor, we screwed holes into the concrete, and then we added Tapcons to indicate just how high we needed to add our self-leveler.
So you can see it was quite about 1 ½” on one end. And then we used a silicone sealant to go around the perimeter. And we actually boxed off the plumbing in this basement bathroom. So we added some of the sealant along all of the framing on the floor so that when we self-level the floor, that won’t go underneath the framing.
So we used a ShopVac to clean up any of the
dust that’s on the floor; it’s really important. Then you wipe that down with a
damp sponge. And then the next step after that is to actually add a perimeter foam to
all of the framing.
And this is going to give you an 1/8” expansion and contraction joint
along the perimeter of the entire bathroom. So again, just staple that to the studs. And
then you want to prime the concrete using the primer that goes along with your self-leveler.
So in this case, we used Laticrete’s PRIME-N-BOND. We actually let that set up for 24 hours. Then we mixed up NXT Leveler. And as you can see here, that screw head, the leveler needs to come up to it.
So we had to mix about 7 bags of NXT to get this bathroom floor nice,
flat, and level. So again, we just used our little squeegee here to get the floor looking
good. And then we let that set up for 24 hours.
Once the self-leveler sets up, you can add a mortar base for your bathtub if the directions call for that. In this case, we’re using a Kohler acrylic bathtub. The directions said to use a mortar base.
We ensured the tub was
level and the predrilled holes in the tub lip where all the studs are located. This
is important because you don’t want the tub lip to crack. And then we used stainless
steel or galvanized screws to secure the tub.
Our mixing valve was by Moen, and Moen requires a sold, metal tub spout. So we just soldered together some copper pipe using Mapp gas. And then we wrenched that into the bottom of our Moen mixing valve and connected the supply lines using Pex piping here.
And then we actually used Pex for the shower head as well. And now we secured this and centered it on the tub. For this tub surround, after we got the Moen mixing valve in, what we did next was waterproof the walls using HYDRO BAN Board.
So we applied HYDRO BAN sealant to the tub here, and then
we actually added the board down over the tub lip. And on this main wall, we were able
to do that because we actually added shims to the wall with ¼” plywood.
So as you can see here, we made a custom shower niche using the HYDRO BAN Board, which is
really cool. And then on the plumbing wall and the wall
opposite that, we actually filled the gap between the board and the tub using the same
HYDRO BAN sealant.
So this is a really great way to waterproof a tub or a shower surround.
Very quick. Easy to do. And that sealant comes in handy where the board meets up with the
drywall transition. We always get questions about that, so you can do the same method.
After waterproofing the shower walls, we used HYDRO BAN liquid waterproofing membrane on the floor. And you got to use a gauge to make sure that you get the right thickness of HYDRO BAN over top your floor.
So there’s a first coat, and we rolled that on with a 3/8”
roller. We let that dry. And then we actually used our paintbrush to go around the perimeter.
And then applied the HYDRO BAN in the opposite direction for the second coat.
So the first
coat takes a few hours to set up, then you can just immediately roll on the second coat.
Once the HYDRO BAN set up, we back buttered all of our 12” x 36” porcelain tiles,
and we used directional troweling over top the floor to set those titles.
These are really, really big tiles for a small basement bathroom, so used T-lock to also get them nice and level. Now we have our self-leveler down, but it never hurts to use a tile-leveling system with these 12” x 36” tiles.
So once all these tiles are set, we cleaned out all the
joints and prep for the next day. After the floor set out, we did all of our
prepping and planning for the shower and the tile layout. We started with the first row,
and then we worked our way up to the bottom of the shower niche.
Now that first row has
to be super level because everything is affected by that. And then we used a Schluter metal
profile at the bottom of the shower niche. We just put that behind all of our subway
Then we back buttered the sill plate tile and set that such that it was even the
slope downward toward the bathtub. Now in this case, we’re using a 2×2 porcelain
mosaic. We’re just lightly tapping it into the thinset mortar on the wall.
By the way, we ended up using the Montolit MasterPiuma to cut all those tile. This is a great tool for any tile setting, really. But it made it super easy. And then we cleaned out all those joints using a paintbrush and a sponge on the shower niche.
So once we got that done,
the next step was to set the tile on the plumbing wall and the wall opposite that. So we just
use an angle grinder and a diamond blade here to cut out a half-moon shape for the mixing
So that’s a great tool if you need to do the exact same thing. So we continued
up this wall, and we actually put our 4×12 subway tile into the shower niche. So to make
it look symmetric on the plumbing wall and the wall opposite that, we just continued
And we back buttered all these tiles. This is a tile that’s going to go
on the top of the shower niche. So we back troweled that to have more thinset so that
it wouldn’t fall off the top of the shower niche.
And then we capped that section again
using our Schluter metal profile, in this case a RONDEC piece. And then we continued
to tile up this main shower wall and to the ceiling. Now we left an expansion and contraction
joint there at the top of 1/8” to 1/16”.
And we did that for all of the walls. So you
can see, that’s how we tiled this shower. The next day, we wiped down the 2×2 tiles
in the shower niche just to make sure they’re clean. And then we mixed up our grout and
grouted that with a mocha color.
Now, the cool thing about this grouting process is that we used Permacolor Select by Laticrete, and you can add color packets to the grout base. So this grout base in that bag is a gray color. We just added our mocha color packet and we grouted the floor in mocha and the shower niche in mocha.
But then we used
the same grout base with a bright white color packet to grout our shower walls. And this
actually saved us time and money. So definitely check out Permacolour Select.
We let the grout on the floor set up overnight, and then we added our vanity here.
we did is we made sure that the vanity is level first; it’s super important. And then
what we did is we found the studs in the wall. So we marked the position of the studs. We
just used two galvanized screws to secure the vanity to the wall.
And then we applied
a silicone sealant along the perimeter of the top of the vanity. So again, you want
to do this because you’re going to seal the sink top to the vanity. And then once
that was secured in place, we added all of our plumbing on the bottom.
So we connect our supply lines and our P-Trap. It’s important to have the closet flange be above the tile floor. So in this case, we added the closet flange. We need to drill hole through that and into the concrete and through the tile and add Tapcons to secure the closet flange.
It’s really important, again, to do that. And then we added our wax
ring on top of the closet flange and positioned our closet flange bolts such that they were
the right distance from the drywall. And then we just compressed our toilet over top of
the wax ring and then secured it to the floor.
This Moen mixing valve came with a trim kit;
it’s a brass trim kit. You want to attach the tub to the copper. You have your escutcheon
that goes over top of the mixing valve and the handle. Now you can adjust this handle
and the temperature, so make sure you do that.
Hot tip here: just use a screwdriver; put that into the shower arm to position that shower arm where you want it. And then you can add Teflon tape to the threads of the shower arm. So about 6 to 7 revolutions should do.
Then you can hand-tighten the shower head. And then use either a crescent wrench or some
pliers. Just be careful of the pliers when you tighten down on the shower head. You don’t
want to scratch that.
And just test everything to make sure that the plumbing works and you
have good pressure. This is what the finish showed looks like.
We’re really happy with the results and hope it gives you good ideas.
If you want more detailed tips on how to build a basement tub/shower combo, our online course on phenomenal. It’s not available over on bathroom repair tutor. You can click right here. We’ll also put a link down in the description.
So if you’re doing this kind of basement project, that course is perfect for you. Thanks for watching today’s video. If you have any questions, add them down in the comments. We’re more than happy to help you out.
Hey what’s up I’m Andrew Bacon, and this is our teeny, tiny master, bedroom closet and I have had enough – and so I’m gonna rip everything out of here, redesign the whole space and make it this awesome.
New stylish and efficient closet and I’d love to show you how I did it on this episode of field treasure designs, and here we go. We took everything out. I cannot believe how much we had managed to stuff in this closet.
So thankfully my wife helped me and we got all the clothes out and all the bins out and then i had to grab the shelf. We pulled that out of there and then i grabbed all my stuff. Bins: hats boxes, clothes, you know all the stuff and in no time it was empty and ready for demolition.
First, I took off some hooks that I had put in for hanging things and I took out the bars and really everything went normal. It was just your basic, you know, closet shelf demo. I had to use my knife to cut away the caulk and paint make sure it wouldn’t pull too hard and so yeah busted out the shells.
You know a piece at a time they went out pretty easy. I found an old air force practice photo on the field which is pretty cool and then just continued on shelf. By shelf. I cut away the joints and used my hammer to pop them out and yeah.
It went pretty easy, got the first shelf all done and got rid of the material, and it was on to the top shelf. I added my earmuffs because the sound of the hammer was so loud in that little closet. Okay, demolition is done.
So here’s what the closet looks like like i said it’s super tiny, but the design is gonna be real efficient and i think it’s gonna be great, so yeah, here’s what we’re working with and it’s time to get to work.
So first I measured the back wall because I’m going to line it with shiplap, then I went to my miter station in my garage, sorry about the lighting. It got kind of dark but yeah. I bought just basic mdf, uh shiplap at the hardware store since wood is so expensive these days, and I cut it to length here’s a cool tip of my saw.
By the way, it casts a shadow to help me find my mark really easily and boom all done so now it’s time to install it. So I’m going to use my nail gun to install the boards and the first board is important because we want it to be level, and so, even though there’s a gap at the top.
That’s okay, because we’re going to caulk that at the end, so once the first board is in all it is, is a matter of going down and doing each board at a time. And then the left and the right side doesn’t matter in terms of their length.
From the wall, because I’m going to put a piece of trim on each side and so it’ll look really nice at the end. I just worked my way down and it’s looking great and so once I got to the bottom, I decided to take the wall.
All the way down to the floor, so I cut out the bottom piece of trim and then I grabbed a scrap piece of mdf shiplap to use as my test to get that width perfectly. So once I got a measurement I took it to my table, saw I cut it to size and then here I’m testing it and it looks like it’s a great fit on both the left and the right side, and so now we’re good I’m using my multi-tool to cut away the other trim so that that last piece of ship shiplap can fit in there and be nice and snug and we’re good.
So now I’m just going to nail it in and then I’m going to put those trim pieces on each side so they’re on the right where I am there, I’m going to also cut out that trim later on, and here we go all done.
The next thing. I wanted to do was install a light that would be wired into a switch, so i’m cutting out the hole for a can light and I shoved it up there. These are super easy to install and since I have attic access right there, it makes this really easy.
So once that was ready, I ran the wires down next to the closet door, and here I am installing a light switch. I am so pumped to get rid of that pull chain light and have an actual toggle switch right next to the door.
So here I’m just doing your basic switch wiring in and I get it all connected and then once it’s secure I can put the face plate on which is like the most satisfying thing ever and then my awesome helper.
He gets to help me see if it works all right turn it on woohoo looks great huh. Can I see yeah while I was doing the light and electrical work? My awesome wife was painting the shiplap black man, it’s looking sweet and there’s that new light.
Now it’s time to cut the boxes, so I’m cutting my three quarter: inch mdf to start the process for making the boxes for the shelf units. Each side of the closet is going to have a tall shelf system and then a stacking hanger system for all the hanging clothes.
The track saw, makes cutting these long cuts awesome. So for the shelf units, I want them to be adjustable, so I’m using the craig pin jig system, which this is my first time using it, and it is incredible.
So I used a standard block. So I knew where to start my holes on each side and then yeah you just go through and use the template to drill out the holes. It has all the hardware you need and then once you’re done, you can take it out and then it has a little pin that you put in and then you mark where you left off now it removes one of the holes that you’ll drill so you’re, not As efficient but yeah, you drill five more holes and then just continue the process.
So I started with just using my hand, and then I realized that I might want to use a clamp, and so i used one of my bench clamps and so that worked well and then I realized later as you’ll, see here in a minute that I actually Had a kreg clamp that worked even better and yeah, you just keep going down the end and it works amazing.
Here i am on the other side going all the way along and, as you can see, there’s a lot of holes to drill but yeah. This thing is awesome. I highly recommend it if you’re doing any adjustable shelving the next day.
I had more to do as you can see it’s a little colder in my shop and now I’m using that kreg clamp, which I think is the best clamp with this system. So there we go done next. I cut the top shelf for each unit.
That will stretch all the way across both sides of the closet. Here, I’m cutting the main box bottom and I’m doing a shelf in the middle that’ll be attached permanently. Here’s what I’ve got so far. I’ve got the size of my boxes that my wife already painted black with the holes drilled in them, then I’ve got the top shelves on each side and then I’ve got a bottom and then a middle shelf that I will attach permanently before I assemble the boxes.
I need to cut out the carpet so that they can rest on the subfloor, so I took the bottom base to use as my measurement next, I grabbed my multi-tool to cut away the base trim there so that the box can fit in nice and flush with The wall grab my little crowbar, which, by the way that thing is super handy and cut away a little bit more and then I just worked my way around okay cool.
Now I fit my piece in to make sure it fit good. Okay, it’s good! Now, I’m going to use this template to cut away the carpet now this tool is super cheap, but it is super important. I cannot believe how great it is at cutting carpet.
I’m going to link to it in the show notes below I tried hard to like get out of the way of the camera, but yeah make a couple cuts and again be real. Careful, do not slice a finger here and yeah just work.
My way around make sure I’m nice and straight. I don’t want to go through that corner and then finally, I was able to get the carpet out a nice clean square, and now I’ve got carpet tacking and the carpet pad the pad comes out pretty easily.
There’s staples that hold it down. I use the knife to cut it away and now I’m ready to clean up the area. I grab my pry bar to take away the carpet pad staples that they had put in, and then I also used my pry bar to get rid of the carpet.
Tacking, the multi-tool works great to cut it away, and so here I thought I might save those just in case, but I ended up not needing them and boom. Now we’re all ready to go. It’s nice and clean and yeah it’s going to be awesome.
Then I just repeated the exact same process on the other side, where my wife’s side of the closet is going to be after I got done, I went and cut down two three-quarter inch pieces of plywood that I’m going to use as the sub layer, and so here I am installing it and that’s going to be where the box rests on it’s going to be exactly flush with the carpet, which is awesome, sweet now, let’s check on the other pieces, so back in the garage all my pieces are painted and we’ve been testing Out the configuration with my boxes and bins, a laundry hamper things like that, so we are ready to put these boxes together.
So I started with the first box shelf, and so here I am laying out the pieces on my work table. First, I did a little vacuum sesh, just to make sure everything was cleaned up and then it was time to start the assembly.
So I wanted to get it all together, then move it into the closet. So I laid it out. We decided to measure where I wanted that middle shelf to go, and then I started by attaching the bottom first once I got the bottom attached, I then rolled it on its side to carefully install the middle shelf.
This side was a little tricky as I needed to make sure it was nice and lined up, but yeah. It worked out great before fully attaching the middle shelf. I wanted to roll it again and then at the top, I’m using one little piece of mdf to hold it together at the top.
It’s also going to have the top shelf holding it secure and it’s going to be mounted against the wall into the studs through the drywall, and so I don’t need that much. But for now I want to make sure it’s nice and secure so with every attaching point by the way and every fastener I did a pilot hole and then I did a little bit of a recessed uh hole and then i drilled in the screw and I Used drywall screws, since those are coarser and they bite a little bit better into the mdf.
Then I got my middle shelf nice and secure after it was laying on top of itself. As you see here, then came the dilemma of the other side, so I did a quick flip and it worked out great. Luckily the parts were nice and secure and nothing broke.
So then I just needed to connect them, so I decided that it was better to have it start on its side. I slid the side into place and then I was able to attach the bottom and go from there for the next two attachments.
I went ahead and rolled it onto its side again just so I could be pointing down for my pilot holes and then attaching the fasteners. I just repeated the same process. I did make sure i measured to make sure they were even.
I wanted to make sure that shelf was going to be nice and level so yeah, just a few more fasteners, and now the middle shelf is nice and secure. Next, I moved on to the top just to secure that top part, and we got that done and now the first box has been assembled.
I flipped it over to make sure we’re looking good and yeah sweet. The last step for the boxes was to install a little screen mold on the faces, and this stuff is readily available at the big box store it’s made of pine, and then I just used three quarter inch nails to tack them onto the front, and so it Just gives it a nice finished, look for the end and then that little bottom there is going to hang over that carpet just a little in the closet which works out great.
So after I got all that done, we moved it to the floor and then I went ahead and filled all the holes. As you can see, I’ve got my family hanging out my wife’s getting ready to paint for the holes. I use DAP alex plus spackling, which I love.
After all, the holes were filled and smoothed out. We let it dry for a couple minutes. Then my awesome wife went ahead and rocked her painting skills. While I went to work assembling the next shelf box, you can see my family coming in and out, which is one of the reasons I love doing projects at home, so after it was all done, it was time to move the first box into position.
I don’t think I realized how big this shelf unit box was, but it actually worked out great and another fun thing was my other daughter came in and helped us out moving this one in and so this side that you see right here, it’s going to go Against the wall, so it didn’t need to be painted and so yeah with a little bit of maneuvering.
We were able to get it in and it’s going to slide right on that three-quarter inch piece of plywood. So it’s level with the carpet and then there it is boom. It’s looking great. All I have to do is attach it to the wall.
Next, I grab the top shelf to do a dry, fit to make sure I have my measurements right, everything’s good. I had already attached the screen molding on the front and painted it so now I just need to level it up.
I grabbed a block there to put underneath I did some nails temporarily. Then I drilled some pilot holes and now I’m doing longer, two and a half inch screws to hold this guy into place after we’re done we’ll putty in those holes and paint them black.
Then a little bit of adjusting and I grabbed a stool and then I was able to get my nail gun up there and pop some nails into that shelf, just to hold it in place after I attached the shelf, I was able to get a measurement for The side trim piece, so I didn’t show you, but I ripped down some mdf.
We painted it black and now I’m installing the trim board on each side and then, after that, we’ll go in and touch up paint against the ceiling and the wall, and all that you see there. I wanted to beef up my hanging rods, and so I went ahead and cut out of the three quarter inch pieces of plywood.
I had some backer boards that I can attach the rods to so after I cut them. I sanded them and then I needed to paint them all black, and so I was trying to save time by painting them all in bulk, and you know as usual when you go to try to save time.
Oh my that was amazing, so yeah. Luckily, aside from getting a little black paint on my pants, which is no big deal, it worked out great. So while I let those dry, I went ahead and busted out the track saw to cut the last pieces for the shelf boxes, the adjustable shelves.
So i ran the length and the width of them, and then I just went down the line and cut them to the right length. Now I needed to cut them a little bit shorter than the width of the box so that they would be able to slide in and out after that, my boards were dry, and so now I’m able to attach the closed rods to these beefy or three-quarter inch Pieces of plywood so that there’s just a little bit more strength when I attach them to the wall and the cabinet box.
These closet rods are working great I’ll link, those below in the show notes as well. I love that there’s a tab on the top there. That’s an additional support, which is part of the reason I wanted to use these three quarter inch pieces of blocking.
While I finished up the raws, my wife started prepping the shelves for paint and then she knocked out paint after that I went ahead and attached the screen mold to the front of each shelf as well, and so once that was done, we filled the holes.
We painted the fronts and then, after that we were ready to bring them in the house and install them first. I installed all of the clothes hanger rods and they went in great as you can see there they’re stacking so one on top the other, and then you can see a few bends that i’ve got in place kind of ready to go as i adjust the shelves Here in a second, and then this is the other side they’re in there nice and secure and yeah the clothes are going to be awesome and yeah.
That’s the other shelf unit. There ready to go and man we are looking good to hold all the adjustable shelves in place. I used five millimeter nickel plated shelf pins and they work perfectly in those holes.
So what’s fun is we got to configure this? The way we wanted – and so i slid in my shelves in the exact heights that i want them and if we want to change it, we can totally do that later and so once i got all the shelves in the right spot, it was just a matter Of adding all the bins, and so the first bin at the bottom on my side, is an ikea bin for a laundry hamper, and then we found these other awesome bins that fit the shelf perfectly for the smaller items and so yeah.
We just slid them into place, and then it was time to move into the closet for the first time and there you have it our mini closet that we have now maximized to its fullest and i’m telling you after using it for about a week now.
I am so thankful. I took the time to make this closet efficient and maximize the space and just make it our own. It has been so awesome, especially for a space that you use all the time right. So hey thanks so much for watching.
I hope it was helpful, don’t forget to hit that like button and subscribe and I’ll see you on the next video thanks.
Hey everyone! And welcome back to my
channel. In today’s video I’m going to talk to you about the best way to choose the
color of your cabinets. Now a lot of people think that the minute they choose
their cabinet color well, that’s downhill from there and then
that’s going to help them narrow down the countertop color.
Well that’s exactly
what’s going to happen if you choose your cabinet color first. Then that
immediately curates your countertop colors because now your choices are a
lot more slim. But if you don’t know which countertop to install, it’s not
going to get easier when you choose the cabinet color because once you finally
decide what it is, you don’t want to be stuck to a cabinet color that may or may
not work with your countertop so this is how you do it.
I was recently in a client’s home and
when I got there, because I was there to help her choose her kitchen finishes, she
had her countertop and her backsplash and everything was just laid out flat on
her chocolate-brown dining table so there is the first
Because you can’t see color when it’s all just laid out flat like that. So the first thing you want to do is lay your finishes exactly how they’re going to be when you install them. So here I’ve got just a medium brown hardwood floor this is Calacatta Novo with Caesarstone and this is Misty Carrara right here.
what you do is you lay them down because now the countertop is going to be
horizontal along with the floor, right? Let’s do our potential cabinet colors
first. So then you plunk them up and what I usually do is I just turn
around whatever sample I happen to have.
You can see that I’ve got an off-white wall here but just so that you’re always creating a clean backdrop with your samples. You can use any poster board for this but if you’re using my large color samples, that’s the easiest way to just instantly create like a clean backdrop.
Okay so then I’ve got a white, true white and an off-white here and this is [Benjamin Moore] Chantilly Lace and this is [Benjamin Moore] White Dove and then the next thing you want to do … this is a really good tip… Most big-box stores sell white, off-white, and cream subway tile. These are really great control tiles to have with you, especially if you’re a designer and you are helping your clients choose tiles.
Because immediately, you can start to see if you’re dealing with a true white tile or an off-white tile or a cream tile because you’ve got the ones that you know are that color, because there’s so many tiles that are just greige, so how do you know that they’re gray? Well you compare them to your control tiles, which is what I have here okay this is my true white backsplash tile here and then I’ve got my off-white backsplash tile here and then you can start to see which one is right.
Now, can I do a true white over here with
Calcutta Novo well Calcutta Novo is actually a little bit greige and so if
you had decided that okay, I’m just going to go with true white because that’s got to go with their most things, right? And then later you decided that Calcutta Novo was
the best countertop choice.
You could not go with
Chantilly Lace because Calcutta Novo is actually greige and taupe. Taupe actually
looks really good with it. So let’s just walk through what my client was
considering when I got to her house.
So when I got to her house she had chosen taupe LVP flooring (luxury vinyl plank flooring). I don’t have any taupe flooring here but I’m just gonna use this [Benjamin Moore] Ranchwood sample because it is identical to the LVP that she was considering.
So let’s put that down here and then so Calcutta
Novo, you can see actually has this taupe actually has some nice taupe veins on it
so if you plunk that down, it matches great. Now how do I know that
this is greige? Well, when I put my cream sample right next to it,
it’s too yellow and that’s how you know that cream is not actually the correct
way to go at all.
So, basically you’re in the world of off-white or you would choose just a lighter, greige color perhaps for the cabinets so that would tie in with that color. However, she was considering [Benjamin Moore] Collingwood she had a true white backsplash tile and Collingwood was the color that she was considering for her cabinets because she’d seen it in a celebrity designer’s kitchen.
when I placed them all together like this, I said, “You know, if you go this
route it’s all really greige now. You’ve got like a you know gray feeling taupe-y
floor. Now you’re going to Collingwood, which is a bit of a purple
gray, for your cabinets.
You know your whole kitchen is going to feel greige.” You
know it’s 2020 right now and gray is already dated now that the black and
white trend is here so in this celebrity designer’s kitchen
she had this countertop but she had this great classic and timeless medium brown floor so Collingwood worked great because it created this balance of warm
and cool and that’s what you want to do when you’re choosing colors, is that you
don’t want everything to be cool or everything to be warm.
You want to create a balance of warm and cool and so if you’re going to copy someone else’s kitchen
make sure you’re actually copying the kitchen almost identically or you’re
just not going to end up with the same results and you’re going to be
So always choose your countertop first because everything flows from there and if you need some help choosing your countertop or any of your kitchen finishes, I can help through my eDesign department. You’ll be very happy with the results when you follow these useful guidelines on how to choose kitchen remodel colors.
I know, I know you guys, I get so many questions. Where have I been? What have I been doing? Am I still doing a YouTube channel? Do I still even bake? Well, I have somethin’ to tell you. I renovated my kitchen and it took forever so I wanna show you everything about it and why I did it.
I think we should really start
at the front door ’cause it’s new so you can see the whole space. Come on. You probably don’t know it, but
I never really had a good entry. There was an awkward closet here.
This was a window. There was a tight door here that
you couldn’t open and let people in. I never used it. Move the door to that way so
there was a nice throughfare and it made a beautiful entry. I put a bench in here, some hooks,
you can just hang your coat up.
And of course I added some sconces ’cause
art and lighting to me was just like key. So it’s a really fun space
now to let people in. It should be easy, you would think, but
this floor took me quite awhile to find.
I wanted a really kind of rustic, yet refined black slate floor. So I finally found it. It’s natural slate. I had it laid in a herringbone with a double bond around the edge just to kinda frame it out.
It’s such a small space so this was like a really huge impact. And I love how, when you come in, it has that great almost farmhouse feel and feels like a slight mudroom entrance, which is exactly what I wanted.
The entryway leads you right
into my open living room. Now you might remember,
I used to sit right here. You saw a big oval door behind me when
I would do all my videos and this was just one big living room, dining room.
The biggest change in here – the layout obviously, the furniture is the same surprisingly – is this doorway I put in. This was never here. I raised the ceilings up to nine foot because that’s what’s original in this farmhouse.
And that foot makes a huge
difference by the way. In doing that, we found a beam
that you couldn’t get rid of. And I realized I don’t want to. It defines the two spaces. So I cased it out in original woodwork
that matches the upstairs, which is the only place in the whole house
that had any original woodwork.
Now, all of it matches
and it really sets it off. The woodwork for me: showpiece. Interiors are huge for me. It’s how I feel at home. You know I love to collect, you know
I love antiques, so obviously I had to incorporate them any place I could.
One way was all these vintage and antique
lithographs I collect of botanical prints. They’re all different flowers. You know I love to garden. And I had them framed with just
the perfect look for this space.
They match really cleanly. They’re just white oak frames that match the floor and it really goes well with this English pine cupboard. I love the mix of natural kind of light tones. My house always felt kind of dark and this was a chance for me to really lighten it up and make it brighter and let more light in.
So everything kind of has those cool
natural tones along with some of my favorite pieces here and there. ‘Cause like fish floats. I collect them. Why? I don’t know, but don’t they look good? I love ’em.
Let’s go into the family room and I
usually back, you know, ten months ago and walked into a wall here. There was a huge wall here and I
never would’ve thought about it until I really started designing the space
and realized, without this wall, it’s not open concept, it’s still
defined rooms, but now everything flows and light gets everywhere.
Again, I cased it in the woodwork, so it felt like it was an original opening with that really good, thick, heavy farmhouse woodwork. And now you can just come on in and everything fits easier. I can get better chairs in here for TV viewing.
A bigger small sectional here, which is
awesome because I never had that kind of couch that I can actually lay down in. The biggest change in
here was the TV area. There was a huge deep closet here and
it kind of was just unusable space.
It had bi-fold doors that
I couldn’t do a lot with. Well now, I have a built-in that is
perfect for displaying a few things, it holds the DVD player, the Dish box,
but also then it just has my TV right here and it’s the perfect place for it.
I used to have it on the wall, but it
felt kind of like obscene just out of the middle of nowhere was this big honkin’ TV. Now it has a home and it feels
really defined and it fits the space. I went slight shade
darker than my woodwork.
Same spectrum, little darker,
just so it gave it a little bit of an edge and set it off slightly. Guys, game-changer. Otherwise, you know me and antiques. I had a mix in a couple pine pieces,
a little pine three-drawer dresser.
It is the perfect element to have
just tucked away with a lamp on it. I can put blankets in it. Antique pieces can be
so versatile and usable. That’s what I love about them. And of course, you know, some old
texture right here with these trunks.
It was so fun to get things
out and say, you know what? I’ve been collecting this for
years, how am I going to use it? Traveler’s pottery: I
can put plants in it. Wood bowls to corral remotes. It’s just a great space.
I love the textures, the coziness. I finally feel at home. The dining room didn’t necessarily change
too much other than it feels a lot bigger. I actually have a bigger table
in here than I ever have, and I can open it up to even bigger.
That’s a dream, you guys. I can have more people over. Otherwise, layout, I think it
pretty much stayed the same. I do have area rugs just to kind of
define the spaces and it adds that cozy texture that I kind of love.
The biggest change in here was this wall. There was a big bay window that bowed out. Now, there is so much more light with
two large doors right onto the patio. These doors literally were the beginning,
I think, of the concept for the design.
They changed everything. They match the two new front doors. They open up wide. They let in a lot more light,
but they also make the patio so much more welcoming. So when you’re sitting here, you
can see everything that’s going on outside: the different seasons,
whether it’s snow, ’cause I put a tree out there at Christmas.
Yeah. Whether it’s the sun in the summer with
all the green, it’s fun to have these doors now just really define the space. For me to make a house feel like a home,
I had to add in my elements, my older things and things that had a story.
I love a story. Like these simple little two stools. These are both my great grandma’s and my
great, great grandpa’s milking stools. They would actually use these on the
farm, which let’s all think about how you had to balance and milk.
.. I don’t get it… But it just adds some great
texture, a great little look, and it also has a great story. And for me, that’s what the
whole point of these items and interiors in your space is. It needs to have a connection and
all these things have a connection.
Even if it’s that I went to a flea market
and bought it, I remember when, and it’s a moment and a memory and I love it anyway. So before we get to the whole
point of this: the kitchen… Let me make sure you understand
what it used to be like.
In the old kitchen, it was pretty dark and
didn’t have a lot of usable space. It had a U-shape and then it had a free floating
island in the middle that I brought in when I took out a built-in table
that took up a lot of the main kitchen.
In the new kitchen, I opened up the wall
into an existing breezeway and added a small baking room with its own wall
oven, microwave, and a small island. The main kitchen has a larger stove and
I put a built-in fridge in a doorway and it honestly opened up the whole room.
The island has a ton of usable space for
me and looks directly into the now open doorway, right into the dining room. That was a game changer
for the whole space. This is the doorway that used
to come into the kitchen.
It was a lot narrower, probably
about like this, and when you walked in, there was a big doorway here,
too, that went out to that little entry where there was a closet. So we filled that in and put a
fridge there that’s built in.
It has the fronts of the cabinets so
it really recedes and doesn’t feel like a heavy fridge right there. You hardly even notice it, which I love. Coming down the line is my stove. Completely different spot as you just
saw, it was on the opposite wall.
Now it’s right here. I would’ve never thought I could fit in
a larger stove, which I did, with more space, have a big hood over it, and have
all these spaces to put items beside it. I wanted the hood to feel built-in, part
of the wall, but then I made shelves inside so I could put extra spices, my
oils, my salts, my pepper, even utensils if I need them here in the stove.
It’s really a working kitchen and it
really works for how I wanna use it. Doesn’t mean it’s not beautiful. I had to add in elements like a
brass gallery rail to match all the finishes with a little shelf.
You can put some old
cutting boards up there. I’m sure at Christmas it will
change just because it always does. And these elements are all exactly
what helped me have a great kitchen. Even like a spice drawer.
I can fit all my spices, not
all – I have extras – but I can fit so many now, right in here. They’re right beside where I need them. When I’m ready to cook or here at the
island, I can just grab ’em and go.
I love it. When thinking how I wanted it to be more of a farmhouse kitchen, it’s kind of a look, obviously, but it also means there’s not usually a lot of just upper cabinets. That kind of breaks up your eyesight and kind of looks not like a true old farmhouse kitchen.
So to change it up and give
a more built-in feel, I have built-in shelves over here. They’re adjustable so I can
change what I put on them. Right now it’s the perfect place
to hold my yellowware collection.
Ya know I love it. Yellowware and brownware, big crock bowls. I could also put on there stock
pots that I could grab and use. The top ones are high enough that you
can’t just grab ’em as easily, but I’m tall so I actually can grab quite a bit.
But it’s a great place just to add some texture and warmth into the kitchen with whatever you put up there. And those little details make the kitchen. So part of the farmhouse feel was little detailed elements like a small ledge up here out of the countertop material.
I brought the countertop up about a
foot and then I put a small two-inch ledge and it just has a nice little
reveal and it finishes it off. So it kind of has that old washstand feel. On an old washstand, you’d
have marble up and then back.
And so it kind of gives that same effect
and it gives you that nice little detail that just makes it feel a little bit
more thought out and put together. And that’s what makes
this whole space exciting! In my old kitchen, I always
hung my skillets underneath the old island that I put in there.
Well, I loved that so much, I
actually added a small space that I could hang my skillets in here so I
can grab ’em, use ’em on the stove. Those elements that you’re used
to is what makes a kitchen yours.
And that’s what I used all over the place. Since I’m doing such neutral colors
and the palette is all kind of clean and white, I needed to add some color. So this is a great way to add
a little bit of color in a rug.
I can change this rug out when I need to. It’s indoor/outdoor material, so for a
kitchen it’s durable and that’s what’s important ’cause, you know, I also
have my little Kip around here too. I wanted some big drawers
since I have a lotta kettles.
I used to stuff them in
kind of a corner cabinet. It didn’t work. Now I have this peg system, so I can
kind of line ’em up as I need to. And the more I use ’em, I keep
changing them around to make it work, but it’s a great way to have
a lot of storage in deep drawers.
And for all the finishes throughout the whole space: unlacquered brass. Right now, it looks shiny, but it’s gonna age and patina. I grew up in a farmhouse, just across the road, that had a lot of old features, like all the old brass door knobs and handles, and they have a great patina on them after so many years of use, and I can’t wait for these to start getting that too.
To have that country house built-in
feel, ceiling to countertop cabinets were a must for me. I love the look. I love how it’s built-in. It looks more like a piece of
furniture, which for me was so important with the kitchen.
I want it to feel like it
flowed with the house and really fit into the surroundings. And one of my favorite features: I
can push ’em back and have it open. So it’s kind of a slight open concept
feel but without being married to it.
So I can have all my plates,
my glasses, my mugs in here. I’m also able to put my coffee
and my espresso machine in here. And then you can, if you’re having people
over and want it more casual, low key, I just open it up, tell people go grab
a plate, grab a glass, whatever they need, and it’s all right there for them.
So it’s kind of that perfect
feel and it kind of is really exciting for me ’cause it’s really
close to the functionality too. So I have my dishwasher here. So when I unload it, I’m able
just to put everything right away, right into my silverware
drawer that’s right underneath it.
So it all flows together,
which works really well for me. You may notice that I’m able to
walk through what used to be a wall. Yeah, my kitchen stopped here. My stove was here. This was not open. There was a small doorway
with an actual door.
So it felt very tight,
closed in, and dark. This is completely different. Again, a cased opening with
that original woodwork. And surrounding it is all this
shiplap and beadboard on the ceiling. There was a very
strategic reason for that.
This, at one point in the house’s
history, I don’t know when, was an add-on. It was like a side porch that
they added a kitchen into. And so I wanted it to feel
separate from the house. So instead of having plaster put
in here, I put it in shiplap.
So it actually feels like maybe
it was a little bit more raw, a little bit more roughed in, which
would’ve been very normal back then. So that beadboard ceiling would’ve
originally been on a porch, so it makes sense that it could
still be here from that original.
I like in my head to think I’m
telling a story and that this is just adding to the house’s history
and the story that it tells. And that is what keeps
me so excited about this. And also in opening that up, I was able
to add square footage that was there and just utilize it and have a baking room.
To mirror the one that’s right on the
other side of the wall here, is another ceiling to counter pantry cabinet. This is all my baking items. And I can push them out when I wanna bake. My mixer is in there.
I sometimes move it over to the
island, sometimes I keep it in there. It’s really a great place to have
everything I need: my sugars, my flours, my sugars for on top of cookies. So it has everything in there.
And then underneath it, I can
put some cookie cutters, I can put a lotta baking spices. So I’m able to really kind of
utilize the kitchen into more of a baking side and a cooking side. It’s a dream. It’s a luxury.
I can’t believe I’m actually able
to use it, and I am so excited. What’s really fun over here
is to make it fully functional for baking, I have a wall oven. And then my microwave is over
here too, just ’cause it makes sense to put ’em together.
So there’s so much storage over here for
all my baking pans, all of my sheet pans. So I can have everything over here
and then I have a small island that I can actually do it on. I can roll out my pie
crust here or my rolls.
I can bake my bread here. I have pound cake going ’cause
I’m having someone over tonight. And underneath, the big thing here was,
it’s not just wood on the second shelf. It is my countertop material. I wanted quartz because I want it to
be durable, but I wanted the look of marble, which is almost impossible
to find a good marble-looking quartz.
I like what I have and what I love is,
putting it on that second shelf means I can take hot pans out of the oven,
put ’em down there, let them cool, so I have a lot more space I can use
without worrying if I’m getting it too hot or if wood would get messed up.
So it’s really usable and that
to me was the whole point. This is all extremely functional and it
works extremely well for what I want. To finish off the baking room,
there was gonna be a big wall here.
And big walls are fine, but I had
things I want to put on that wall. So I got these wonderful racks
that you can hang items from. So these are brass, they
will age, they will patina. And then I have some of my
copper collection on here.
There’s molds, there’s cake pans. Actually I do use some of
it, like, the pans I do use. But it’s a great place to put it all. It adds a lot of warmth
over here, which I love. It bounces that warm light around,
especially when all the lights are on in the evening, and it
really finishes off the space.
It makes it feel like this working
kitchen and that’s what I love. It is extremely a working kitchen. I use it hard. I’m gonna use it hard, but it
actually has beauty to it too. And to me, you need to marry that
beauty with the functionality ’cause I love it both.
And those brass elements keep on going to all the hardware in the whole place. So all the back plates are brass. They’re unlacquered. They’re gonna age, they’re gonna get that patina, especially the more you use ’em, the more you put your oils on them, they’re already starting to show just a little bit.
And then the push button switches. Guys, this is huge. I grew up in a house that still had
the original push button switches, only like one or two though. And I was able to find replicas
with little Mother of Pearl inserts.
And what’s great is, they make ’em now
that you can have a dimmer on them. So they’re a look in themselves. It has a story. It has a look to it. So now when people come over,
they’re like, “oh, your house always had those old switches?” I can either say “uh-uh,” or I
can say, “no, but I found them.
“That’s what I love, when everything tells a story and it really fits in with that old feel I’m having everywhere. And that’s why I chose these door handles. These handles are exactly what my upstairs still has and did have.
So in my head, they were always in the house. They’re rimlock handles, so they have a little bit different way they’re put in. You actually have to inset into the doorframe a little bit. But again, they’re unlacquered brass, so they’re gonna patina and age and get darker.
But moreso, they’re what
the house would’ve had. And that to me is what’s
so important here. The story keeps being told and it
keeps going together and now going forth, you weren’t changing anything. I was really just bringing
it back to what it was.
While the black windows look a little
bit more modern, they’re actually an original style to a farmhouse. And some old farmhouses had black. A lot had a dark green color around here. But these are actually pretty much the
original windows with more functionality and they don’t have the window weights.
I remember those. Those were awful. And don’t worry. If you think you missed something or wanna know more, I’m gonna try to talk about every product I have on the blog post. So go read about it on my website: wyseguide.com. I will put every single thing, hopefully, that I’ve used in here, maybe some links in there to hope point you in the right direction. I want you to be able to find everything, get all your questions answered, and hopefully be inspired.
That’s the whole new space. That’s where I’ve been the last
I don’t know how many months. And I can’t wait to now have all these
new videos for you in this space. They’re so much better. I’m gonna be talking to you
live as I’m making the food.
That’s a complete difference
from what I was doing before. But moreso, it’s gonna be more me
because this is completely me and I poured my heart and soul into it. So I can’t wait now that
you have seen it too.
So I’m gonna keep inviting
you into my house. I’m gonna show you awesome recipes. I want you to keep sharing them around,
telling me what you want to see. If you want more of my outside,
keep checking my Instagram ’cause I am giving garden updates all the
time and telling you information.
I love to hear from you and I love to see how you are inspired by this. So, come back and I’ll meet ya in the kitchen.
If you want to remodel your kitchen using a rustic theme, you have to consider various design factors. Among these is the aesthetics. It is important to consider a design that emphasizes natural elements and works well with the kitchen’s functional needs. Moreover, it is best to include accessories that give a personal touch to the kitchen’s design.
Another design element that can make a kitchen look rustic is the use of weathered wood. You can incorporate this in the kitchen’s cabinets, walls, and beams. Similarly, you can use porcelain tiles that mimic real wood. This is a practical solution that you can use when you don’t have access to real wood. Aside from that, you can choose a color palette that matches the look of the wood. Lastly, you can add a textured area rug to tie everything together.
In the end, you can also consider adding a drop-down desk, which is perfect for a small home office. By choosing the right designs and materials, you can have a rustic theme kitchen that’s beautiful, functional, and livable.
Rustic Kitchen Essentials
Designing a Rustic Kitchen: If you’re looking to create a rustic kitchen, there are a few things you’ll need to take into account. First, you’ll need to choose the right materials. Rustic kitchen designs often incorporate natural materials like wood and stone. You’ll also want to choose rustic-style fixtures and appliances.
Choosing the Right Materials: When it comes to rustic kitchen design, the materials you choose are key. Look for natural materials like wood and stone. You can also incorporate rustic elements like reclaimed wood beams or antique stone flooring.
Creating a Functional Layout: When designing a rustic kitchen, it’s important to create a functional layout. This means incorporating elements like a prep sink or an island into your design. You’ll also want to make sure that your appliances are easily accessible.
Bringing Your Rustic Kitchen to Life: Once you’ve designed your rustic kitchen, it’s time to bring it to life. This means adding rustic-style furniture and accessories. You can also add personal touches like a rustic-style backsplash or a stone fireplace.
So you want to give your kitchen a fresh makeover, but you neither have the time nor the money to make any major renovations. Today, we’re going to show you how to give your kitchen a makeover all in the time it takes to make a Pot Roast.
First, in order to have a delicious dinner
ready by the time your kitchen is done, let’s get the Pot Roast started. You’ll need a crockpot to cook everything
in, like this crockpot by Cuisinart. You’ll also need your basic cooking utensils,
like knives and a cutting board, and a pan.
The ingredients you will need are: 4 lb. beef chuck roast, 2 large sweet onions, 2
red bell peppers, 2 cups celery, 3 cups peeled baby carrots whole, 4 cloves of minced garlic,
4 tablespoons olive oil, 1/4 cup all-purpose flour, 3 tablespoons tomato paste, 3 tablespoons
dark rum, 3 cup water, 1 cup beef broth, 1 can (14-oz) whole tomatoes in juice, 2 teaspoons
chili sauce, 2 teaspoons sugar, 2 teaspoons salt, 1 teaspoon black pepper.
First, chop the sweet onions, bell peppers,
and celery. Now brown the meat in a large skillet with
the olive oil. Transfer it to your crockpot and add all the
ingredients except for the flour, onions, bell peppers and carrots.
Set it to medium and let it cook for the next
6 hours while you go about making over your kitchen. Update or add new cabinet hardware to your
kitchen cabinets. They not only add new dimension to your kitchen,
but are affordable and easy to install.
For these knobs, we used the Sleek collection from Amerock. When it comes time to install the knobs, use a template, which you can find at your local Lowe’s, to ensure the knobs are installed correctly and evenly.
Check out our “How to Install Kitchen Knobs” video for the complete instructions. Light fixtures are often the focal point in any room design, so switch out any light fixtures or add more light to dramatically change the atmosphere of your kitchen.
For this makeover, we replaced this older pendant with a more modern pendant. Consider adding under cabinet lighting, which is a great way to increase counter visibility and accent your kitchen style.
Plus, under cabinet lighting is often very
easy to install. To learn how to install a pendant, check out
our How to Install a Pendant video. Replace your plumbing fixtures to introduce
new design elements to your kitchen.
When choosing the finish for your faucet,
take into consideration not only the sink, but the kitchen surroundings as a whole. The finish of the faucet will complement the
knobs and other accents of your kitchen.
To find out how to install a kitchen faucet,
check out our How to Install a Kitchen faucet video. Once you’ve made these changes, don’t forget
the little details of your kitchen. Swapping out items like a new trash can and
soap dispenser will put the finishing touches on you makeover.
Now that we’ve updated the kitchen, let’s
finish our Pot Roast. After 6 hours of slow cooking, add the remaining
ingredients and raise the temperature to medium. Let it cook for two more hours. Once the meat breaks apart easily with a fork
and the veggies are cooked, remove them from the pot to a serving dish.
You will have plenty of juice left over, which
you can simmer into a gravy. Just ladle 1 cup of juice into a pan, set
at medium, and add some of the flour with water until you reach your preferred thickness.
With a fresh, hot meal ready, behold your
Hello and welcome You watch channel RunmanReCords Design. Today we show beautiful bathrooms design and decor ideas. Small space, stylish faucets and lighting. Rustic style bathroom with forest view. Spacious, room, beautiful bathtub and shower.
Great design ideas for your bathroom. Lighting ideas, beautiful bedroom and decor ideas., Modern rustic, bathroom Interior design. Luxurious mansion with mountain and forest views. Wooden floor and stylish furniture, copper sink and bathroom faucet design, ideas. Stone, floors, luxury, wash basin cabinet. Luxurious, bathroom, beautiful wooden, floor. Wood and stone stylish solutions for decorating this small bathroom.
A cozy cottage, a great place to relax on vacation. Copper bath and sink the best solution for your home interior design. Ideas – bathroom with fireplace. Thank you for watching. You can subscribe to our channel and watch new videos.
Every day we publish our new videos on social networks, follow us on Facebook and Twitter, Great ideas for a luxury, bathroom., Dark tiles and light wood, trends. A creative idea for your bathroom.
Stone, copper and wood. This is a real rustic style, Luxurious cottage in Colorado, stylish bathroom with fireplace. Log cottage, a beautiful copper sink and lamps.
Hey everybody, Sam here and Angela, and welcome to our channel welcome back to our home, where we’re doing a renovation of our 1988 palm harbor single mobile home, we installed the back door in our last video.
This awesome wonderful residential door. In today’s video we are going to kick off by doing some electrical cleanup and then we start building the wall to kick start the video we’re going to come back in time with me to yesterday, where i spent a little bit of time doing some electrical work here at our back door in preparation of today’s wall work with our door installed.
I can now focus my attention on this wonderful bundle of mess, the original wiring from the light switches, the outdoor light and the outdoor outlet that we used to have here in our back door. We’Re going to replicate everything we’re going to still have our switch for our new laundry pantry area right above us there’ll also be a switch for an outdoor light on the back side of the house right here at the door.
There will be the light for an outside light and there’s going to be an outlet box down closer to the floor for an outdoor outlet as well. Our door is not trimmed out, so we need to be forward thinking enough to realize we’re going to have our drywall, then we’re going to have some door casement molding, and then we want to have our outlets or our light switches beside them.
We don’t want to crowd up the casing, but we don’t want our switches to go too far down the wall, that we have to make our pantry smaller or, in reality, not make it as large as possible. Just because of where you put the switches looking here.
What we’ve got our king and jack stud? This is probably going to be the thickness of our trim molding on the door once it’s done, so i’m going to put another two by board right up against this. It won’t be a floor-to-ceiling stud.
It doesn’t need to do anything but space, the outlet box off and then i’ll put the switch on the other side of that two by the switch box itself is going to be a two gang or one of the square ones where it holds two different switches.
In it that way, we have one box to control the light inside and outside. At the same time, i’m going to do the same type thing down below for the outdoor outlet i’ll have a two by thick material just to space it off of the king, stud i’ll, attach it there, then we can cut the metal, siding and let it attach And go through the wall at that point up here for our outdoor light, we’re going to put the box right about here, i’m going to attach it to the stud i’m going to mark where i need to cut the siding for this outlet for the light box To go, let’s see if we can cut it with the oscillating tool, foreign we’ll be reusing.
The original outdoor light wiring there’s nothing wrong with it. It’s 14 gauge copper. It’s going to feed it in through this little tab, just like that, give ourselves a service loop and then I’ll staple it here on the stud.
So we have several walls that we’re going to have to build for this, but we’re going to go ahead and try and tackle the biggest one. First, and that’s going to be the one. That’s right here behind me that separates the kitchen from the closet and pantry to do this wall to lay it out.
I think the easiest thing to do for me is to take this scrap 2×4, which is the thickness of the wall. We’re going to frame up we’ll, go ahead and lay it here on the floor. I’M going to reference off of this face of this stud, which is the last remnants of the good wall, lay it this way and then measure from the wall to make sure it is parallel with the wall.
I think it’s gonna be the easiest way to lay it out, so we’ll try that first 53 and a quarter now that we have that wall’s location marked on the floor, we’re going to change direction and we’re going to give ourselves our reference point for this Wall, this is the pantry wall.
I went ahead and cut this 2×4 to go from the floor up to the ceiling, which is not conventional when framing walls. Normally you do top bottom plates and your studs are in between them this one. Since it is floating it’s going to be floating in this space, it’s going to be easier to do it long, so we can attach it to the bottom plate of this wall and the top plate of this wall.
This also gives us our point from here. We will measure out, we will square up a line and scribe where this wall will go. So we can find that mysterious intersection out there in the middle of our kitchen and make sure it’s square.
We are going to space this wall, three inches off of the electrical switch box. Here that way, we still have half inch for our drywall. We still have enough room for our plate cover and we’re not just crowding things too much all the while making sure we make our pantry as big as possible too.
So it looks like three inches. Is the magic number for us i’ll go ahead and put it here? Attach the bottom plate get my level, i will plumb it and then i’ll attach it to the top plate, the new wall? Okay, now we can just grab our lines on the floor.
This way and find our like, i said, magical intersection, so it looks good down there. Let me stand on it. Did we ever find our speed square? Alright, let’s see if this matches our pencil line, it does sweet mark it hey.
What’s that look for, I ate the line. That’s all right! I have what’s going to be the top plate of our wall, and this wall is going to be right where these wires run through they’re going to run through the middle of the top plate.
So i’m going to hold it in place, put some lines here and then drill our three holes here. So we can go ahead and next thread the top plate up and go ahead and attach it to the ceiling. I don’t know if that’s in a ceiling truss or not so don’t think i’ll trust it to stay.
Put all right, let’s measure, for our stud, if you don’t know what ceiling angle you’re dealing with which we don’t really know, we know our roof outside’s a 412. But who knows what all popcorn in here is doing? You can take a scrap piece of wood.
You can hold it up: plumb, like I’ll hold it right up there against my wall and mark the angle then I’ll take this over. My miter saw fidget with the bevel on it and find out what the angle is. Save it, and then i know what angle to cut all of my studs out so a little bit of relative dimensioning for figure out angles and a little bit of mathology.
Lessons too moment of truth. First, one cut – and we don’t have many of these nine foot boards to waste good. It is not too short, but you always worry about our first wall is done, and that was actually pretty easy overall, so we’ve got the studs here, spaced 16 inches on center.
What we’re going to do next is go ahead and start framing the partition wall, the one that separates the pantry from the closet. It’s going to go right about here straight across and the way i want to build.
That is very similar to how i put this stud here. First, we’re gonna have our left side go from floor to ceiling right side floor to ceiling, then we’ll fill in our bottom plate top plate and studs in the middle.
It is not conventional, it is not how you normally see walls framed how they’re framed all in one piece and raised up it’s really difficult to do that in a space like this, and since this is not a load bearing wall, it is just for a place To hang drywall and hang some stuff, it will still be fine.
It’s gonna be rock solid anyway much more than the 1x3s we had to begin with. So I believe we are rocking and rolling pretty well got Angela set up here in the cutting station bedroom and I’m over there calling out measurements, and you know she’s trimming them as need be because I don’t measure right or she’s telling me it’s better.
Do this than that, it’s it’s! A great team work how we work. It is that’s how it works. Yeah, i made the comment. You know we married almost 18 years. This summer will be 18 years. I have very much learned to be okay with being wrong.
When is it applicable when i really need to be wrong, i’m okay being wrong, because honestly, you’re usually right in that sense, i save him more work. You do i’ve learned that i’ve learned it. I’Ve learned in this situation.
If you’re like you know something such i’m like, okay, it’s just easier, so sam’s tip of the day to anybody out there, it’s okay to be wrong, learn to be okay of being wrong. It’Ll make you feel right all right, so we’ve reached the point.
We are starting to go ahead and frame out um. Well, i guess our door frames our door openings for the closets angela and i did some quick online surfing of home depot, which is the store that’s close to us that we like, but they had in stock.
For doors found the doors we plan on buying, looked up their rough opening for framing and that’s what we’re going to start the framework? Would you like to tell them anything else, not really tell them.
Where is the doors? Oh tell them? What your thoughts are? Oh geez, i’m ready to work um. They are going to be white, bifold doors they’re about 36 inches wide, which will give us just a little bit of a.
I don’t know. What do you call it door, opening book yeah a reveal – i don’t know so. We have, i guess, small little walls that we’re going to be building, which means that i get to use up all my little bitty scraps, which makes me happy, because wood prices are crazy.
Yep and most of these cuts have been like just a hair over 49 inches, which means you’re burning, eight footers left to right, yeah. It hurts yeah, we’ll use them, though all right, so we’re going to start building the closet here in the bedroom.
First, that’s going to be the easiest one work away from here towards the kitchen: well, laundry room, pantry, it’s a whole other space. We’re gonna learn we’ll just keep at it until it gets dark or we run out of steam or the kids right out of steam.
Let’s keep going um. Look at the precision. Look at the precision every bit used to make it easy for cutting this piece. Here so that angel wasn’t left with a bevel cut and honestly because it really doesn’t matter either way.
I had her just give me a square cut and ah it’s kind of floating. I then had her cut me a shorter little block when this goes here. All i have to do, then, is butt this up to it and attach them this way and we’re done there’s a little gap here.
Yes, but none of this is load bearing this is just honestly places to put your drywall. Hang the door lower down the door. Will hang from it, but up here it’s kind of dead space, so maybe that could be something helpful for anybody else out there.
You know if you’re fighting with angles and you’re really not wanting to waste your ten dollar, eight foot, two by fours, just get a square cut edge, close enough and cut you a little spacer block that way.
It really takes the guesswork out of it and saves your sanity. Maybe i’ve reached the point where i’m tuckered, i’m done it’s uh 7 15 and i feel pretty accomplished with what we got done so far. Yeah we got walls, we do pretty much.
They may not be filled in yet, but we have walls right sit tight, though we’re going to continue the party tomorrow, and we will finish out framing this thing promise so don’t go anywhere. All right, guys! Welcome back to today, which was tomorrow yesterday, it’s today today, we are going to finish out framing today, we’re going to put in our headers our little mini headers for our closets here paint your closet.
There finish framing the actual divider wall between the two and otherwise be done with framing for this project in preparation of installing drywall. Let’s go. Oh I’m going to space my s. No! It’s yeah right there, yeah! Okay, since my drywall joint, I want it to match up with the drywall over there.
I’M measuring off of it to find where to put my 16 inch on center studs or short little studs up here, so that when it comes time to do drywall, I don’t have to add any boards all right. These are square cuts.
Six and three quarter: you can tell me ten and a quarter and 13 and 3 4. hey uh. We have come down to the time that we need to put the studs in the dividing wall. That’s between the closet and the pantry.
We can get away with. Probably only doing two studs, but i want to do three. We’Re gonna have several closet systems like you’ll see later, but i want to have multiple areas of stud strength behind it.
So i don’t have to worry about too much weight of canned goods or anything like that. That’s going to pull the drywall off the wall make holes that sort of thing. So Sam has already made the points that we’re going to put the studs on and I’m going to get in there and cut them for him.
So he can slap them up and i think that makes us just about done with all the framing nope blocking. That’s not framing, though that’s drywall, that’s part of framing, so let’s get going, let’s go 95 and a quarter 92 and a quarter 89 and 3 8.
.Well, the framing is done, and it’s great, it’s so nice to be able to see what it’s going to be. What it’s going to look like that type thing, the finished depth is going to be about 16 inches for the pantry, and, while that’s not as deep as we would have preferred, we had a set amount of space that we could work with.
We had the light switch right here. We wanted a certain amount of space away from it and then the wall in the bedroom. So we had to kind of work with what we had and we did – and this is so much more pantry space than we had before and it can be floor to ceiling and we didn’t have that anywhere else that we could have done in here.
So this is a thousand times better than it was before we kind of ran into the same thing for our closet in here, as we did in the pantry, with only a set amount of space, we had to kind of move the center wall to make the Best of use of the space, the google term, for how deep a closet should be, is 24 inches.
This one is going to end up being 22 inches finished, but i feel like that is still going to be plenty of room for us to be able to hang up our shirts we’re not trying to get big puffy jackets or anything like that in there, and That enables us to keep this flat wall and the closet out of the bedroom space, which is what we really wanted now for sam’s boring part the technical bits.
What else we got left to do? Obviously, we’ve got to make sure all of our corners and junction points for drywall have sufficient blocking or support behind them. We have a lot of three quarter inch plywood left over from the subfloor that we are not going to use for any more subfloor ever in this house.
So we’re going to use that with some strips fill them in here and there and that work out great. In addition, if camera lady will paint up to the ceiling for one second yeah something’s a little bit out of place on the new closet, we need to move that light, we’re going to hope and pray that it’s a simple procedure of undoing the box.
Taking the wire feeding it through drilling a new hole and putting the old worm box back in place, but we’re not entirely sure yet either way that needs done and another question may pop up of. Are we going to keep a nasty old pool chain full cord piece of twine? Yes and no? We’Ve already bought our new closet light, and it’s one that i never knew such a light existed and is a perfect solution that is very similar to what we have.
But it looks a lot better than the whole silence of the lambs hanging. Light bulb type, weird situation that we’ve been rocking for well ever since we lived here in here with the pantry we have talked back and forth on.
Should we put a light in here? Should we not? What do we want to do? We currently have one single light right here above the door that is not centered with the door anymore, since we moved it down, we’re thinking, we’ll probably go to the store and we’ll look and see how expensive track lighting is, or something of the sense to give Us linear functionality with lighting, allow us to re-center it or at least take away the obviousness that it’s not centered anymore and then give us.
Maybe some task lighting have one shooting here in the pantry one down below and one at the laundry station kind of sounds. Like a cool idea to us, but we haven’t seen how expensive those lights are yet so it may change our minds on that in the future and last but not least, as far as technical stuff, with the area we got it to do, there are some wires Still hanging from the ceiling this one here i don’t know if the camera can see it, can you see it yep sure you can see it it’s hanging down pretty far, that was an original junction box and hard-wired smoke detector for the house.
We had one of our viewers: send us some hardwired smoke detectors and we’re going to absolutely put one back in place here and up front in our living room. Reconnect them. So if something happens, we should be going off.
You know two alarm fire. I guess maybe two arms we also are going to put in some junction boxes in the ceiling for the wires that have used to go to old things in the wall, we’re just going to close them off seal them off, but put them in a junction box.
So it’s all legal good right and tight and you can get to it in the future if you ever have to. I think that’s it for the technical bits as far as the closet and pantry situation, but, as usual, that’s all subject to change as we progress through this fun journey of what it is we’re doing do do so do do.
We have reached a stopping point for this video. This has been a three day video and we have reached a good point to say goodbye. That’s enough! That’s enough! You guys have ingested quite a bit. We’ve made some great progress and gotten to a really good milestone for the work.
I’M very excited to be able to see what we’ve been thinking and dreaming about in our heads pause. I feel like you’ve said that, like the past three or four videos, i know, but this is like huge differences in our house: it’s not just slap paint on it.
It is like taking down multiple walls and putting something in that we’ve only dreamed of having for the past couple of weeks. These are new dreams, but they’re our dreams. All the same. I’Ve always wanted a good pantry, not something just on top of the dryer, which is what we’ve had yeah.
So it’s also nice that we actually have walls. We can’t just float through these fictitious tape. Walls we well, i cannot fit through you might both fit through. That’s an 11 inch stud spacing so let’s see go ahead.
Huh! No! Don’t talk about me. I would say in the next couple of days this is going to be getting covered up too, and so our visions in our head are become visions in real life. There. You go visions, well guys, thanks for coming along as we framed out the pantry in our closet and if you have any questions or comments, leave them below.
Otherwise, we’ll see you guys next time on the homestead see you guys bye, but also not go so far. That way, as we end up not having to what as we would have picked in a perfect world, we had a definite amount of space that we could use.
Is that the right way of saying it? Hi camera, yeah, hey camera, i’m right here and it’s like? No, your face is better with me, not even in the there likewise down below. I will use additional one buyer.
No, that same it won’t be the same. One it’ll be different. Well guys, thanks for coming along, as we did some more work in our single wide. That’s kind of weird okay walking backwards to frame up the shot stuff.
We do don’t want to face with the camera. Okay think that’s about it for technical bits, but again we’ll show you guys all this stuff whenever we finally get to do it. But that’s that’s fizzle! Closed sizzle, sam fizzle, yeah elijah! I told you not to mess with that booger we’ll get in trouble.
So we’re going to use that with some strips fit them in here there heading in here there thanks for coming along, as we framed out the you didn’t say: well guys, okay, that threw you off like that. Like this, i’m looking at where i want the camera there, we go.
It’s like that movies. Like I’m looking right at you. Can you see me that’s a new one. It is my eyes are looking at you that’s hard to do all right. Sorry guys you’re taking a back seat, I got ta, be able to see this.
I can hammer it right at least show a little bit of competency here with a hammer. Oh trying to show off and I broke my box – there’s one for the blooper reel see if I got another box man we’ll see you guys next time on the homestead see you guys bye.
I think there might be a ghost or something in there. What is that? Is it either? No they’re outside there’s, probably starting to go across the floor? What was it i don’t know it’s very windy outside, so it could be that well, we got all the windows open in the doors, the awesome new door.
You may need to close those. I got. Ta get some b-roll to show people what it looks like then we’re done. I’M just closing these most of the way. That’s fine! So we’re going to the store and we’re getting our closet doors right, yeah all right, I’m gonna go put my clothes up online.
What’s up guys, I’m Brad Rodriguez from Fix This, Build That, and today I’m going to show you how to remodel this small contractor basic bathroom and gave it a whole new look with a custom tiled shower surround in all new fixtures.
Stay tuned. I’Ll! Show you just how I did it. This is the small bathroom I’ll be working on it’s 6 foot by 5 foot, excluding the bathtub and has two doors in it to boot. It was also the contractor basic package with bland flooring.
A sheet mirror generic lights in a basic shower. So when my friends at the Home Depot challenged me to remodel a bathroom, I just jumped on the opportunity. I started pulling all the old fixtures out of the bathroom, the toilet and vanity go relatively fast is they’re.
Just unfastened, But the mirror took a little bit of a finesse because it’s glued to the wall. We donated or sold all the old fixtures we could, since they still work great Now. Unfortunately, there’s really no way to get a one-piece shower surround out of a bathroom without hacking it to bits.
I started. Removing the hardware and here’s a little tip for the tub spouts Take a picture of the underside of the spout. If you see a set screw, it’s likely a friction fit. You just loosen that set screw and then pull the spout off.
If there’s no set screw there, It’s a threaded fit and you just unscrew the spout. After disconnecting the plumbing, I used a nine inch wide strip of plywood to score a line around the walls. Above this round, I used a smaller strip to outline the sides of this round as well.
Keeping clean lines here is going to help you down the road when it’s time for new drywall. With a hammer and a pry bar, I remove the drywall around the surround to reveal the flange. That’s used to secure the shower to the wall studs beneath. I checked behind the surround to make sure there is no wires or pipes and then I started cutting. And you definitely want to wear a dust mask here. While you’re doing this. The fiberglass is pretty nasty, but a sharp blade and a reciprocating saw makes quick work of the walls.
I couldn’t quite get through the base of the tub, though, But I got it down to a small enough size where we could pull it out. The last piece left was the floor. I used a pry bar and pulled the flooring up, which apparently wasn’t attached very well because it came up really easily and we replaced the Flooring with a modern white large format tile and it really helps make a small bathroom feel bigger.
I made a whole video on replacing the floor, so I won’t cover that today, but you can go check out the full video. There’s a link below and at the end of the video with a clean slate. It was time to start building the bathroom back up and we wanted to go with a bright Look to make.
This small space seem bigger and we also wanted custom touches to give the bathroom a high-end feel and The most involved upgrade was the Delta up style wall system and bathtub, And the plumbing connections needed to be moved to fit.
The new tub and I’d highly recommend using a licensed plumber for that. I pre-drilled holes in the flanges for the install. Then I hooked up the drain and overflow connections on the tub, And once these were set, I secured the tub to the studs with panhead screws.
I used shims any place where the tub was a little off the studs to avoid cracking the flange Next up. I did my first dry fit of the up style wall system, we’re using. I put the back and left wall in a place to check for fitment and the right wall needs cutouts for the plumbing.
So I took measurements and I made cutouts for the spouts in the mixer valve. The up style system is supported by furring strips on the wall. Now one thing I’d have done differently. If I did it again, though, Is that add more vertical studs in there as well and make these 12 inches on center instead of 24 inches on center, Which is what my bathroom has, I think it’s 16 inch studs though. You’d probably be okay. The 24 inch on center Just gave a little more flex than I’d prefer after install, And then I did one more dry fit of all the walls to make sure the furring strips are in the right place.
I pre-drilled the flanges at the stud locations to make the install quick once the adhesive is put on as well. The wall kit comes with double stick tape to help hold the wall to the furring strips while the adhesive sealant sets.
I used DAP 3.0 for the sealant, which is one of the three recommended products specifically for this acrylic material. Now a generous amount of adhesive is put onto each furring strip, and then we brought the back wall in We held it in place, making sure it was level to the marks that we made during the dry fit.
Then I secured it to the studs along the top flange and in this little screw recess in the accent tile channel. I pressed the rest of the wall firmly to the double sided tape and spread even pressure along the furring strips for good contact before installing the wall with applying pipes in it.
I put on the fire retardant pad provided in the kid and cutout for the mixing valve. I applied the sealant to the furring strips just like before, and then I wedged the wall piece. Then I secured the wall panel with screws and then I repeated the process for the left side.
The biggest thing to watch out for here is just to make sure that the sidewall, Our tights in the back before you secure them. So there aren’t any gaps in the corners and everything should have been leveled during your dry, fit and Hey.
If you’re new here and like what you’re seeing be sure to subscribe., I hope to see you around in the comments As a final step to help the wall set up firmly. I use some two by fours wedged against the tub to hold the bottom tight and left it all to set up for 24 hours.
The wall system has a nice subway tile look, but what really sets it apart is the custom accent channel to add your own style. We went with the hexagonal mosaic tile for this feature. I set up my tile saw and I used an extra floor tile clamped to the table as a zero clearance cutting surface Cutting a shallow line in the tile lets.
You see exactly where the cut will be, And it also gives you support to cut small tiles which have a tendency to blow out and chip. I Cut down the tiles to the right height of the accident opening and then I cut the pieces to size for the beginning and ends of the channel And the tile install is quite a bit different than normal tile.
Install Regular mastic won’t stick to the acrylic. So again, here I had to use the special sealant, So first I caulk the corners to make sure that they were Watertight, and then I filled in that screw channel to seal the screws and also give a flat surface for the tiles.
After that, the sealant is applied. Just like the mastic and trialed with a v-notch trowel, I pressed the mosaic strips into the adhesive and I use small spacers to keep it from sliding down And the adhesive holds it firmly to the wall.
So you don’t need to worry about it. Falling off. Just sliding down Now. My biggest piece of advice here is to watch your edges on the top and bottom. I first started out applying too much of the caulk and it was globbing up on the edges and then I wasn’t putting enough on there And it wasn’t quite sticking the small tiles in place.
There’s a fine line between getting just the right amount of adhesion without getting a lot of squeeze out. There was definitely a little finagling to do with the gaps right between where the strips meet up, but I smooth it all out best.
I could and let it sit for another 24 hours to cure Now. The grounding stage is similar to other grouting. The only thing you need to do here is mask off the surrounding areas. I use some painters, tape and some clear plastic to keep the grout from scratching the acrylic.
Then I mixed up some unsanded grout and I worked it into the mosaic tiles. I did both of the sidewalls first and I came back and wiped off the excess grout With a sponge before it could dry too much and become difficult to remove.
Then I moved onto the back wall and I did the same process there. After that, I decided to remove the tape and work the grout joints a little bit around the edges. I’M glad I did this because I definitely had some bleed over and working the joints now before they fully hardened.
Let me still shape them and correct any issues. I dinished up for the day by buffing off as much of the grout haze as I could, then I came back and got the rest Of it. The next day, The last piece to button up the shower surround was to caulk all the seams.
I taped off the seams with painters tape and I used a grout caulk to match the grout that I used for the accent strips. It was a little messy on that right, side. So, on the left side, I went ahead and taped that seam as well.
For the acrylic seams, I went back to the DAP 3.0 and caulked all the seams, using my finger to smooth everything out and then removing the tape. Honestly, though, I’d look into the other two recommended cocks for this task, because after a couple of weeks, the DAP is already a dingy White and we haven’t even used the shower yet And with the shower all buttoned up, I moved on to repairing the drywall I Covered up the back wall in the lower portions of the side wall, with some straight drywall strips For the corners, I cut l-shaped pieces out using my multi-tool.
The multi-tool is great for cutting odd, shaped pieces and drywall, and it really makes short work of it. Using an l-shaped piece instead of two connecting straight pieces, also makes mudding and blend in the corners much easier.
I taped and applied my initial coat of drywall mud to the seams and the screw holes. I’M not particularly good at drywall, but I make up for it by enjoying it even less. In total, I did four coats of mud sanding between each one, And one thing: I’ve learned along the way is it’s much better to do more light coats than to try to do fewer thicker coats.
Thick coats just take way too long to dry and is prone to shrinkage. Nobody likes shrinkage Before installing the shower hardware. I turned over the painting to Susan and she knocked it out. We put up a nice light gray.
That goes well with a simple modern. Look that we’re going for, I hung up the new light fixture to give us some better light, and then I moved on back to the shower. When I tried to install the mixing valve cover, though I realized the hole that I’d cut wasn’t quite large enough.
I should have cut it much law to allow servicing the mixer valve, But at this point I just wanted to open it up enough for the cover to fit. So I used my rotary tool to widen the opening. The fixtures I’m using are the Everly line from Delta.
We really liked their look and feel in the curves of the handles in The tub spout. Has this fun little twist to it That just gives it some great character and they both just screw on in our set in place.
I also added sealant on both pieces to avoid water leakage into the wall. The showerhead was the last piece to be installed. It definitely gives the shower a more custom feel also. I finished off the renovation by installing a new Delta toilet, a vanity with the everly style, faucet and a mirror.
These are all easy to install in the upgraded versions. We went with really transformed the look in the feel of this small bathroom now I’ll have links in the description to all the items. I used in this remodel.
Hey, I got another video queued up for you. Just click right there It’ll take you right over if you’re not subscribed to the channel. Already I’d love to have you as part of the team and until next time guys get out there and build something awesome.