
If you are interested in doing a DIY shower remodel from start to finish, you will find a variety of resources to help you. You will find tips and information on tile selection, safety hazards, and the cost of the project.
Cost of a DIY shower remodel
The cost of a shower remodel will depend on the size of the shower and the fixtures and materials you choose. Some types of renovations, such as installing a stone slab for a seamless shower stall, can be quite expensive. However, there are ways to cut costs while still getting the results you want.
Before getting started, make sure you’re familiar with the basic plumbing and building codes for your home. It’s also a good idea to get a building permit. If you’re remodeling a bathroom, the cost of a building permit can range from $350-$1,000, depending on the municipality.
Once you’ve obtained a permit, you’ll need to hire a plumber. Most cities only have one bulk waste day a month, so you might have to rent a dumpster for cleanup.
To begin, you’ll need to remove the tub. You’ll need a prybar and a helper. Depending on the size of your shower, the removal process can take a couple of days.
Choosing between ceramic and porcelain tiles for showers
When it comes to choosing between ceramic and porcelain tiles for showers, it’s important to know the differences. The two are made from the same material, but the porcelain is much harder to cut than the ceramic.
Porcelain is a more durable tile that lasts longer. While it’s not as affordable as ceramic, you can still find quality porcelain for less than $3 a square foot.
Both materials are great heat conductors, and the difference between them is more apparent when they are used in bathrooms. Ceramic is less expensive and easier to install, and porcelain requires more professional tools to cut.
Porcelain is also more resistant to moisture than ceramic, which makes it an ideal choice for wet areas like showers. Unlike ceramic, it doesn’t require a sealant to be installed. However, it is recommended to look for slip-resistant porcelain.
Both materials are available in a variety of colors and styles, and they can be found for less than $2 a square foot. They are also available in unglazed versions, which can be beneficial for sealing the surface.
Preparing for unexpected costs
When you’re planning a DIY shower remodel, there are several considerations. For one, you’re going to have to consider the cost of materials. This can vary depending on the size of the shower. The material you choose is also a factor.
Using the right kind of materials will help you avoid a big bill. If you’re lucky, you’ll have some leftovers to spend on other projects. Keeping track of the money you’ve spent will also reduce your chances of running into additional charges.
While the cost of a bathroom remodel can be daunting, it doesn’t have to be. There are ways to cut costs and still get a quality bathroom.
In fact, you might even be able to do a shower remodel for under a grand. Just be sure to plan ahead. Even a small project can take longer if it’s not completed in a timely manner.
One of the more complicated aspects of a shower remodel is moving plumbing. This can involve tearing out the floor of your entire bathroom. You might want to hire a contractor for this task.
Safety hazards in a diy shower remodel
Whether you’re renovating a small bathroom or a large one, there are plenty of safety hazards to consider. Fortunately, there are design solutions to help you get through the process without sacrificing style or comfort.
In order to get started, you’ll need to determine what kind of fixtures, plumbing and lighting you need to replace. It’s also helpful to know the height of the shower head. These issues can be fairly trivial, but they’re critical to safety. You’ll need to get the necessary permits and inspections before you can complete your remodel. The last thing you want is to make a mistake that costs you money later.
When you’re completing your DIY shower remodel, you’ll want to take into consideration these five safety hazards. While there are a variety of safety devices to install, you can’t completely address all of them. For example, if you’re installing a grab bar, you’ll need to take care to avoid blocking water supply pipes and electrical wires.